User Manual
Table Of Contents
- Using the Manuals
- Basic Structure
- Using a Connected Computer
- Connecting to a computer
- Creating a Song with a computer
- Recording your performance on the instrument to DAW software as MIDI data
- Recording your performance on the instrument to DAW software as audio data
- Recording Arpeggio phrases of the instrument to DAW software as MIDI data
- Remote-controlling DAW software or VSTi (software instruments) from the instrument
- Remote Control Assignments
- Using iOS Applications
- Reference
File Utility RemotePerformance Song/Pattern
MX49 MX61 MX88 Reference Manual
Song/Pattern setting
Song
Pattern
59
Pattern
The various internal Rhythm Patterns of the instrument can be played back from this display.
1 Pattern playback location and length
2 Pattern parameter
A single parameter for editing is indicated in each page.
Operation
Press [PATTERN] Edit parameters in Pattern display
Parameter Description
Pattern category
Pattern number
Pattern name
Selects the category and number for the desired Pattern. After moving the cursor to the category indication
or number indication by using the Cursor [
<]/[>] buttons, select a Pattern by changing the category or
number.
Settings: Category ...... Rock, R&B, Elct, Jazz, Wrld, Orch
Number ........differs depending on the category
Voice category
Voice number
Voice name
Determines which Voice will be used for the Rhythm Pattern. If the Rhythm Pattern is changed, this
parameter will be automatically set to the appropriate Drum Voice for the Rhythm Pattern. This Voice is set
by default as the Voice of Part 10 of the selected Performance.
Settings: Refer to the “Voice List” of the “Data List” PDF document.
Volume For adjusting the Pattern volume. This parameter is linked to the “Volume” parameter of Part 10.
Settings: 0 – 127
Pan
Determines the stereo pan position for the Pattern. This parameter is linked to the “Pan” parameter of Part 10.
Settings: L63 (far left) – C (center) – R63 (far right)
ChoSend
(Chorus Send)
Determines the Send level of the signal sent to the Chorus effect. This parameter is linked to the “ChoSend”
parameter of Part 10.
Settings: 0 – 127
RevSend
(Reverb Send)
Determines the Send level of the signal sent to the Reverb effect. This parameter is linked to the “RevSend”
parameter of Part 10.
Settings: 0 – 127
AutoKeyOnStart Determines whether or not the Rhythm Pattern is played back immediately when you press any note on the
keyboard. When you switch to a Performance for which “AutoKeyStart” is set to on, the lamp of the [R/K]
(Play/ Pause) button will start to flash slowly, and the Rhythm Pattern will play back as soon as you play the
keyboard.
Settings: off, on
PATTERN*****01:01/04
aElct:132:Ambient
1
2