User Manual

Operation flow from starting the application to closing it
MX49/MX61 Remote Editor Owner’s Manual
4
After transfer has been successfully completed, the Edit window appears.
n If data transfer in the Auto Sync window fails even when the MX49/MX61 and computer are connected properly,
make sure to set the “MIDI IN/OUT” parameter to “USB” and the Device Number parameter to “1” or “All” in the
Utility MIDI display on the MX49/MX61.
2.Select “Setup” from the [File] menu to call up the Setup window.
3.Confirm that the “MIDI Port” is set to “Yamaha MX49/MX61,” then select the desired DAW
software from the “DAW Select” column.
If the MX49/MX61 and the MX49/MX61 Remote Editor are connected properly via USB, you can confirm
that the “MIDI Port” is set to “Yamaha MX49/MX61” when the above window appears. The DAW selection
is necessary for performing the Scan operation (“VSTi Database” menu in the [File] menu) and obtaining
the VSTi-related information.