User Manual

MX49/MX61 Reference Manual

Basic Structure

Using a Connected

Computer

Using iOS

Applications

Basic Structure

Controller Block

Tone Generator Block

Effect Block

Arpeggio Block

Song/Pattern

Playing Block

Internal Memory

MIDI/Audio Signal Flow

Connecting to a computer

Creating a Song with a

computer

Reference

Performance

Song/Pattern

File

Utility

Remote

7 On the MIDI track, set the Input/ Output Routing to allow MX49/MX61 data to be input to Cubase

and to allow MIDI track data to be output to Port 1 of the MX49/MX61.

Set the Input Routing to “All MIDI Inputs” and set the Output Routing to “Yamaha MX49/MX61 (Yamaha MX49/

MX61–1).” All incoming MIDI data will be input to Cubase, and MIDI track data will be output to the channel

determined at the track on MIDI Port 1 of the MX49/MX61. Also, the MX Voice List can be shown on the track of

Cubase.

NOTE If you didn’t execute Step 5 above, set the Output Routing to “Yamaha MX49/MX61–1.”

8 Determine which Voice will be used for the MIDI track data.

Click in the Program Selector to call up the MX49/MX61 Voice List, then select the desired Voice. The Voice

assigned to the MX49/MX61 Part corresponding to the output channel for the MIDI track is replaced by the Voice

you’ve selected on Cubase. Check the sound while playing the MX49/MX61 keyboard.

NOTE If you don’t select the Voice on Cubase, the Voice currently assigned to the Part on the MX49/MX61 will sound.

Input Routing

Output Routing

Program Selector

Voice List