User Manual

MX49/MX61 Reference Manual
Basic Structure
Using a Connected
Computer
Using iOS
Applications
Basic Structure
Controller Block
Tone Generator Block
Effect Block
Arpeggio Block
Song/Pattern
Playing Block
Internal Memory
MIDI/Audio Signal Flow
Connecting to a computer
Creating a Song with a
computer
Reference
Performance
Song/Pattern
File
Utility
Remote
6
Voice Components
Each Voice consists of OSC (Oscillator), FILTER, AMP (Amplitude), and LFO components. Editing parameters of these
components allows you to create original sounds.
OSC
This component determines the wave (the basic sound material) the note range for the sound, velocity range (the
strength at which you play the keys). These are fixed to suitable settings for each Voice.
FILTER
This component modifies the tone of the sound output from OSC by subtracting a specific frequency range of the
sound. Filter related parameters can be set in the Filter/EG display (page 48) of Performance Part Edit.
AMP
This component controls the output level (amplitude) of the sound output from FILTER. AMP related parameters can be
set in the Play Mode display and the Filter/EG display (page 48).
LFO
This unit produces cyclic modulation for the Oscillator, Filter, and Amplitude. Modulating these aspects of the sound can
create effects such as vibrato, wah and tremolo. LFO related parameters can be set in the Voice LFO display (page 51)
of Voice Edit.
LFO
FILTEROSC AMP
Low Frequency
Oscillator
Wave
Changes the tonal
quality of the sound.
Filter EG (Filter
Envelope Generator)
Controls the output
level (amplitude) of
the sound.
Amplitude EG
(Amplitude Enve-
lope Generator)
To Effect
block