User Manual

File Utility RemotePerformance Song/Pattern

MX49/MX61 Reference Manual

Utility

General

MIDI

Controllers

Remote

Utility Job

QuickSeup

Factory Set

Version

By pressing [ENTER] in this display, you can restore this synthesizer’s User memory (page 17) to the factory default

settings (Factory Set). Please note that the setting of “PowerOn Auto” on this display will be stored automatically by

executing FactorySet.

NOTICE

When the factory settings are restored, all User Voice, Performance, and system settings in the Utility will be erased. Therefore,

you should be careful not to overwrite irreplaceable data. Furthermore, it is wise to regularly create backup copies of important

data to a USB flash memory, computer, or other device.

NOTE For instructions on executing Factory Set, see the Owner’s Manual.

1 PowerOn Auto (Power On Auto Factory Set)

When this parameter is set to on, turning the power on will restore the User memory to the factory default settings.

Normally, this should be set to off.

Settings: off, on

NOTICE

When setting “PowerOn Auto” to “on” and executing Factory Set, the Factory Set function will automatically be executed each

time you turn the power on. When setting the Auto Factory Set parameter to off and pressing the [ENTER] button, the Factory Set

will not be executed when turning the power on the next time.

Indicates the current version of this instrument and copyright. The “Firm: *.**” indication at the lower right of the 1st

display shows the instrument’s version.

Factory Set

Version

JOB*Factory*Set

****PowerOn*Auto=off

JOB*Version

BBoot:1.00*Firm:1.00