User Manual
Table Of Contents
- Using the Manuals
- Basic Structure
- Using a Connected Computer
- Connecting to a computer
- Creating a Song with a computer
- Recording your performance on the instrument to DAW software as MIDI data
- Recording your performance on the instrument to DAW software as audio data
- Recording Arpeggio phrases of the instrument to DAW software as MIDI data
- Remote-controlling DAW software or VSTi (software instruments) from the instrument
- Remote Control Assignments
- Using iOS Applications
- Reference
MX49 MX61 MX88 Reference Manual
Basic Structure
Using a Connected
Computer
Using iOS
Applications
Basic Structure
Controller Block
Tone Generator Block
Effect Block
Arpeggio Block
Song/Pattern
Playing Block
Internal Memory
MIDI/Audio Signal Flow
Connecting to a computer
Creating a Song with a
computer
Reference
Performance
Song/Pattern
File
Utility
Remote
21
Audio channels
The audio signals of the instrument can be output to the USB [TO HOST] terminal and the OUTPUT [L/MONO]/[R]
jacks. When connecting to a computer, use the USB [TO HOST] terminal. In this case, up to two audio channels
(USB 1 and USB2) are available. The audio signals of the instrument can be input from the USB [TO HOST]
terminal and the [AUX IN] jack. Up to two channels of audio can be input to the USB [TO HOST] terminal. Set the
output level by setting the “DAW Level” parameter (page 64) on the instrument. The signals are output to the
OUTPUT [L/MONO]/[R] jack. Also, up to two audio channels can be input to the [AUX IN] jacks. The signal is sent
to directly the OUTPUT [L/MONO]/[R] jack. For more details, see the “MIDI/Audio Signal Flow” section (page 18).