User Manual

MX49 MX61 MX88 Reference Manual
Basic Structure
Using a Connected
Computer
Using iOS
Applications
Basic Structure
Controller Block
Tone Generator Block
Effect Block
Arpeggio Block
Song/Pattern
Playing Block
Internal Memory
MIDI/Audio Signal Flow
Connecting to a computer
Creating a Song with a
computer
Reference
Performance
Song/Pattern
File
Utility
Remote
33
Remote control of the VSTi
This section explains how to set up the VSTi on Cubase to enable use of the Remote Control function.
1 Use the Quick Setup function of the instrument to specify the “DAW Rec” connection.
Press [UTILITY]  [JOB]  Select “01:QuickSetup”  [ENTER]  Set “Type” to “DAW Rec”  [ENTER]. Local
Control (page 65) is set to off. Use this setting when you want to record your performance on this instrument
(excepting Arpeggio data) to DAW software.
2 Set up the instrument for remote control of Cubase by following the instructions in “Setting up
the instrument” (page 31).
3 Create a MIDI track.
Click “Project” menu  “Add Track”  “MIDI”  [Add Track].
4 Press [ADD INST TRACK] ([SYN COMP]) on the instrument to display the “Add Instrument
Track” dialog in the Cubase project window.
5 Select a VSTi by using the Cursor buttons of the instrument.
Press the Cursor [V] button to display the VSTi list in the dialog, then select a VSTi by using the Cursor [V]/[>]
buttons—for this example we’ll select “Synth”  “HALion Sonic SE.” After selecting, press [ENTER].
6 Press [ENTER] of the instrument to close the “Add Instrument Track” dialog.
The instrument track will be created in the Cubase project window, and the Control Template for “HALion Sonic
SE” will be selected automatically on the instrument.
HINT
This instrument features Control Templates for remote control of popular VSTi instruments. These Control
Templates let you assign the appropriate functions for your favorite VSTi to Knobs [A] – [D] on the instrument.
When using Cubase, switching the VSTi on the Cubase changes to the appropriate Control Template on the
instrument. When using other DAW software than Cubase, switching the VSTi on the DAW software does not affect
the Control Template on the instrument. You should set the appropriate Control Template manually to match the
VSTi on the DAW software. For settings of the Remote mode on the instrument, see page 70.