User Manual
Table Of Contents
- Using the Manuals
- Basic Structure
- Using a Connected Computer
- Connecting to a computer
- Creating a Song with a computer
- Recording your performance on the instrument to DAW software as MIDI data
- Recording your performance on the instrument to DAW software as audio data
- Recording Arpeggio phrases of the instrument to DAW software as MIDI data
- Remote-controlling DAW software or VSTi (software instruments) from the instrument
- Remote Control Assignments
- Using iOS Applications
- Reference
Song/Pattern File Utility RemotePerformance
MX49 MX61 MX88 Reference Manual
Performance
Performance Play
Performance Select
Performance Part Select
Performance Edit
Common Edit
Chorus Eff
Reverb Eff
Master EQ
Arp Switch
General
Name
Part Edit
Play Mode
Filter/EG
Arp Select
Receive Switch
Voice Edit
Voice Insert Eff /
DrumKit Insert Eff
Voice LFO
Voice Ctrl Set /
DrumKit Ctrl Set
Voice N ame /
DrumKit Name
Voice Job
Voice Store
Performance Job
Initialize
Recall
Copy
Bulk
Performance Store
Supplementary
Information
41
Performance Select
Selects a Performance from the multiple Performances available on the instrument.
1 Performance number
Indicates the number of the selected Performance. You can switch the Performance number by using the [DATA] dial or
the [INC/YES]/[DEC/NO] buttons.
2 Performance group
Indicates the group (A – H) of the selected Performance. You can switch the Performance group by holding down the
[SHIFT] button and using the [DATA] dial or the [INC/YES]/[DEC/NO] buttons.
3 Performance name
Indicates the name of the selected Performance.
Performance Part Select
In this display, you can select one Part from Parts 1 – 16 and play it. Also, you can change the Voice assigned to each
Part, and certain Part parameters, including Volume and Pan. There are several pages in this display, which can be
called up by using the Cursor [u]/[d] buttons.
NOTE Parameters that can be edited in the Part Select display are same as the parameters of the Part Edit display.
First page
1 Voice
Indicates the category, number, and name of the Voice which is assigned to the selected Part. Using the [DATA] dial or
the [INC/YES]/[DEC/NO] buttons lets you switch the Voice category in the first page. You can also switch the Voice
number after moving the cursor of the display by pressing the Cursor [d] button one time.
2 Page indicator
Indicates that the display has several pages. You can call up the next page by pressing the Cursor [d] button.
3 Parts 1 – 16
Select a Part by pressing the Cursor [<]/[>] buttons or the Category buttons ([1] – [16]). The underline mark indicates
the selected Part number.
Operation
Press PERFORMANCE [SELECT] button Select Performance with [DATA] dial
Operation
Press [PART SELECT] Select Part with Cursor [<]/[>] buttons Edit the parameters
PerformanceaSelect
c001(A01):MXCategory
1 2 3
APA:A001:CncrtGrand
a
3
tyuiop@000123456789
1
2 3