User guide

9
ENGLISH
MY16-Cll Owner’s Manual
The MY16-CII handles 16 channels of audio input and output that are assigned to bundles that will
be transmitted and received to and from the appropriate network devices.
The MY16-CII can use up to 4 output bundles and up to 8 input bundles.
The maximum number of channels that can be assigned to each bundle is as follows.
Maximum channels per bundle
*Since 96-kHz audio is handled as two 48-kHz signals combined, the maximum number of channels is halved.
**The audio signal output from the 4th channel will include some aliasing noise, and proper operation cannot be guaranteed. Please do
not use this channel.
n The number of channels per bundled can be changes as shown below.
Depending on the configuration, the maximum number of channels that can be handle
may be less than 8.
Number of bundles per channel and usable channels
The MY16-CII System
Latency
16bit,
48kHz
20bit,
48kHz
24bit,
48kHz
16bit,
96kHz
20bit,
96kHz
24bit,
96kHz
5.33ms 8 8 7 4* 4* 3**
2.66ms 8 8 8 4* 4* 4*
1.33ms 8 8 8 4* 4* 4*
Channels per
Bundle
Input / Output Bundle Input Bundle
Bundle
1
Bundle
2
Bundle
3
Bundle
4
Bundle
5
Bundle
6
Bundle
7
Bundle
8
8 1-8 9-16
------
4 1-4 5-8 9-12 13-16
----
2 1-2 3-4 5-6 7-8 9-10 11-12 13-14 15-16
1 12345678
MY16-CII
Input Bundle
Input Bundle
s 1-4
1-4
Input Bundles 1-4 Output Bundle
Output Bundle
s 1-8
1-8
Output Bundles 1-8
CobraNet Connector
CobraNet Device
DME64N/24N etc
Optional I/O Slot
CobraNet cable
CobraNet audio signal
Control Data
9
MY16-C_E.book Page 9 Monday, August 7, 2006 11:40 AM