Owner's Manual

20 MY8-LAKE Owner’s Manual
4. Tap the HPF filter box at the top
left of the screen to select the
HPF filter. (The LPF filter box is
shown at the top right of the
screen when enabled.)
5. Adjust the HPF frequency center
point by dragging the green HPF
adjustment tool to the left or
right.
6. Tap the [HPF Select] button, then
select a desired type of filter
from the scroll bar that appears.
7. Tap the [HPF Set] button and tap
[Yes] after reading the warning
dialog.
NOTE
To view the overall EQ response including
the HPF/LPF and PEQ/GEQ filters, tap the
[HPF/LPF Functions] button, then tap the
[EQ Preferences] button, and finally tap
[Full Response]. The white line changes
to include the effect of all EQ filters from
all PEQ and GEQ overlays that affect the
selected module as shown below.
Storing Modules and
Systems
Before we move to the next section, store
the existing configuration as an individual
module file and as a System file.
1. Tap the [Home] button, then tap
the [Modules] button.
2. Select a module icon in the work
area, then tap the [Module Store/
Recall] button.
NOTE
A module must be selected before the
Module Store/Recall function is activated.
3. Tap the [New Store] button, then
enter a module filename, and
then tap [OK] (or press <Enter>).
Filter box
HPF adjustment tool
Scroll bar