Installation guide

Yamaha Steinberg FW Driver Installation Guide
19
Error Messages
Appendix
Error message Cause Solution
Failed to initialize.
Initialization of Yamaha Steinberg FW Driver
has failed.
Restart the computer.
(Software name) (Version) is
installed. Yamaha Steinberg FW
Driver cannot work with this version.
Please update it to V1.6.3 or later.
(Windows only)
The version of n Driver, AI Driver and mLAN
Driver/mLAN Tools installed to your computer
may not be compatible with the Yamaha Stein-
berg FW Driver.
Uninstall AI Driver (n Driver).
Update mLAN Driver/mLAN Tools installed to
your computer to V1.6.3 or later.
Failed to open Control Panel.
The Yamaha Steinberg FW Driver does not
work properly.
Try the following operations.
· Restart the computer.
· Uninstall then install Yamaha Steinberg FW
Driver
Failed to change driver setting due
to another processing.
The settings on the Control Panel cannot be
accepted because another program is now
changing the settings of the Yamaha Stein-
berg FW Driver.
Perform the settings again after a while.
Failed to change driver setting.
Failed due to a cause other than the above.
· Disconnect the IEEE1394 cable from the
device compatible with the Yamaha Stein-
berg FW Driver then connect again or turn
off the power to that device then turn on the
power again.
· Restart the computer.
Insufficient memory space.
Exit all unnecessary applications and uninstall
the unnecessary drivers.