Operation Manual

EAUS1394
Multi-function display
1. Clock
2. Speedometer
3. Fuel gauge
4. Odometer/tripmeter/fuel reserve tripmeter
5. “RESET/SELECT” button
TIP
The multi-function display performs
the following self-test for three
seconds in order to check the electri-
cal circuit.
G The speedometer digits display
from 0 to 99, and then from 99 to
0 in kilometers. If the speedome-
ter is set to miles, the digits dis-
play from 0 to 65, and then from
65 to 0.
G All LCD segments and warning
lights come on and then go off.
EWA12312
Be sure to stop the vehicle before
making any setting changes to the
multi-function display. Changing
settings while riding can distract
the operator and increase the risk
of an accident.
The multi-function display is equip-
ped with the following:
G a digital clock
G a digital speedometer (which
shows riding speed)
G an odometer (which shows the
total distance traveled)
G a tripmeter (which shows the dis-
tance traveled since it was last
set to zero)
G a fuel reserve tripmeter (which
shows the distance traveled on
the fuel reserve)
G a fuel gauge
G a self-diagnosis device
TIP
G Be sure to turn the key to “ ”
before using the button.
G For the U.K. only: To switch the
speedometer and odometer/trip-
meter displays between kilome-
ters and miles, when the main
switch is turned to “ ”, press
the button for at least eight
seconds.
To set the clock:
1. Select the odometer and push
the button for at least three
seconds.
2. When the hour digits start flas-
hing, push the button to set the
hours.
WARNING
INSTRUMENT AND CONTROL FUNCTIONS
3-3
3
5C2-F8199-E3 7/9/10 18:10 Página 6