User Manual
Dante Firmware Update Manager User Guide
Version 2.7 Commercial in Confidence Page 7 of 21
Figure 1 - start screen
3.1. About version 3.10.6
Version 3.10.6 of the Firmware Update Manager can be used to update the firmware for the following Dante
modules:
▪ Brooklyn II
▪ Broadway
▪ Ultimo
▪ Ultimo X
▪ Dante PCIe Card
▪ Dante HC
▪ Dante IP Core
▪ AVIO (Dante adapters)
▪ Dante-MY16-AUD version 3.3.9 and up (for previous versions, see the Yamaha website)
▪ Dante-MY16-AUD2
▪ DLM version 3.3.6 and up (for previous versions, upgrade using the module web interface)
The Firmware Update Manager applies Dante firmware update files (file extension .dnt) to connected
hardware devices. Update files may be provided by Audinate or by your device manufacturer.