User Manual
Technical Data Sheet
1 / 4
Dante Interface Card Dante-MY16-AUD2
Overview
Dante-MY16-AUD2 is an optional Dante network interface card for
compatible Yamaha digital mixing consoles and signal processors.
It can give your system additional 16 Dante inputs and outputs.
Features
• Supports 44.1 and 88.2kHz sample rates, in addition to the previously-supported 48 and 96kHz sample rates.
• Sample rate pull-up/down can be used to synchronise audio with video that has undergone frame rate conversion.
• Dante-MY16-AUD2 cards can be daisy chained together via the secondary Ethernet port.
• Dante-MY16-AUD2 can be PIN-locked and unlocked using Dante Controller.
• 2 x RJ-45 connectors for Dante I/O, 1 x D-sub 9 pin connector for RS232-C.
• Latency can be selected from five preset values: 0.25 ms, 0.5 ms, 1.0 ms, 2.0 ms, or 5.0 ms.
• More than 16 audio channels can be transferred when used with multiple Dante-MY16-AUD2 cards.
• Automatic discovery and setup for network devices. Devices names can be specified as required.
• Allows direct PC or Mac audio input and output without the need for an audio interface.
• Dimensions: 120mm x 40mm x 176mm (4.7" x 1.6" x 6.9")