User Manual

2.3. Clock Synchronization Mode
Like the MY16-C, the MY16-CII provides three clock synchronization modes: Network Sync, Host
Sync 1, and Host Sync 2. The clock synchronization mode is automatically selected according to
the word clock status of the host device into which the MY16-CII is installed.
If the device into which the MY16-CII is installed receives its clock signal from the MY16-CII, the
MY16-CII will operate in Network Sync mode.
Network Sync
MY16-CII
Clock
PM5D etc
Figure 24: Network Sync
If the device into which the MY16-CII is installed receives its clock signal from an external device
which is not part of the CobraNet network, the MY16-CII will operate in Host Sync 1 mode.
Host Sync 1
MY16-CII
Device external to
CobraNet network
Clock
PM5D etc
Figure 25: Host Sync 1
If two or more MY16-CII cards are installed in the same host device, and the host device receives
its clock signal from one of those MY16-CII cards, all other MY16-CII cards that receive their
clock signal from the host will operate in Host Sync 2 mode.
CobraNet Manager Lite for Yamaha Owner’s Manual 20