Owner`s manual

39 En
English
ADVANCED
OPERATION
Configure the system settings of the unit while viewing the front display.
1 Turn off the unit.
2 While holding down RETURN on the front
panel, press
A (power).
3 Rotate SELECT/ENTER to select an item.
4 Press SELECT/ENTER to select a setting.
5 Press A (power) to set the unit to turn off and
turn it on again.
The new settings take effect.
Restores the default settings for the unit.
Choices
New firmware that provides additional features or product
improvements will be released as needed. If the unit is
connected to the Internet, you can download the firmware
via the network. For details, refer to the information
supplied with updates.
■ Firmware update procedure
Do not perform this procedure unless firmware update is
necessary. Also, make sure you read the information
supplied with updates before updating the firmware.
1 When the “NETWORK” displayed on the front
display, press RETURN to start firmware
update.
y
If the unit detects newer firmware over the network,
“NewFwAvailable” appears as the “Information” menu item in
“Network Setup”. In this case, you can also update the unit’s
firmware by following the procedure in “Updating the unit’s
firmware via the network” (p.40).
Check the version of firmware currently installed on the
unit.
y
• You can also check the firmware version in “Update” (p.38) in
the “Setup” menu.
• It may take a while until the firmware version is displayed.
Configuring the system settings (ADVANCED SETUP menu)
ADVANCED SETUP menu items
Item Function Page
INIT Restores the default settings. 39
UPDATE Updates the firmware. 39
VERSION
Checks the version of firmware
currently installed on the unit.
39
Restoring the default settings (INIT)
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.
STANDBY/ON
VOLUME
RETURN
PUSH - ENTER
TUNINGPRESET FM/AM MEMORY
BASS TREBLE INPUT
FM MODE DISPLAY
SELECT
PHONES
SPEAKERS
AB
A (power)
SELECT/ENTER
RETURN
INIT••••••CANCEL
Updating the firmware (UPDATE)
Checking the firmware version
(VERSION)
UPDATE•••NETWORK
VERSION••••xx.xx