User manual

MENU DESCRIPTION

Then a blank display is inserted, and the first display (routing to “PS10R2”) is displayed

again.

Now another example using the setup PS10R2 (2-4) and LS600 (1-3). In that case, the

main and the sub are supposed to share the same speakon cable. The ‘Input Patch’ sub

menu in the “Options” of the NXAMP will then display the following:

Note that the position of the text shows that output speakon A (1rst column) and output

speakon C (3

column) should be used for connecting the LS600. This is confirmed in the

next display.

It is followed by the output pinout display.

PAGE 56 OF 140