User manual

MENU DESCRIPTION
Any combination of input can be patched on each output. Be careful when patching both
analog and digital input together to one channel: It is very unlikely that the two signals can
be in phase. We recommend using this solution only for analog backup of digital network,
meaning that only digital or analog inputs will be used at a time.
Save/recall user setups
User setups contain all the settings of the NXAMP Powered TDcontroller, so you can
consider that a user setup is a snapshot of the amplifier state. To access the Save/recall
menu, go to the Option menu, and select the sub-menu 3. Save/Recall (see above).
On the center of the screen will be displayed the various setups with the setups name. On
each side you can select either ‘Save’ or ‘Recall’ function.
To save a user setup select the memory block you want to use (there are 32 different
memory blocks) by turning the wheel till the chosen memory block appears on the top line
of the LCD screen. Then press the ‘Select 1’ button (for “Save”). Anytime you can exit this
menu by depressing the A button (for “Back”).
PAGE 59 OF 140