User manual

NXES104 EXPANSION BOARD, REMOTE CONTROL AND ASIO DRIVER
Warning: Switching from a scene to another one is immediate and does not ask for any
confirmation, even if the cabinet family or cabinet type is changed. Therefore take care
when changing scene under live conditions.
(23) Cabinet Setup
Pressing the “Set” button in this control displays the list of the setups available into the
memory of the NXAMP. By default only the setup from the same family are displayed.
NB: First time you press the “Set” button for a NXAMP firmware that is not known yet by
ESmonitor™ on this computer, it might take a few seconds to read all the setups available.
The current setup is marked with a star. You can also see the setup number if the left
column. If you go to “Show all setups” mode by pressing the radio button, then all the
setups available in the unit will be displayed.
PAGE 93 OF 140