User manual

NXES104 EXPANSION BOARD, REMOTE CONTROL AND ASIO DRIVER
Installing the ASIO streamer
The ASIO streamer is a piece of software designed by Auvitran and that can be
downloaded from there website (
www.auvitran.com). It works on Windows® based PC
computer.
This software will install:
1) A virtual soundcard ASIO driver (named “Auvitran ASIO”) on your computer with 2 or 4
audio outputs. Thus any ASIO host will have the possibility to output sound on this
virtual soundcard.
2) A control panel (named “AVS-AsioControlPanel”) in which you can select which NXAMP
on your LAN network will be the physical receiver of the audio data sent by the Host.
Setting up the NXAMP for ASIO mode
See the “NXAMP control page in ESmonitor™ software” above for details.
Setting up the AsioControlPanel
The settings are very straightforward. Here is a picture of the AVS-AsioControlPanel. The
ASIO settings should be let unchanged in most of the cases. See the ASIO streamer user
manual on the Auvitran website for details about these settings and troubleshooting.
In Network settings, select the network adapter of you computer connected to the target
NXAMP, or through the LAN connected to the target NXAMP.
NB: Connecting through a Wi-Fi adapter is possible but not recommended, because of
potential packets drop that can be responsible of periodical audio mute.
PAGE 95 OF 140