User Manual

ManualsBrandsYamaha ManualsAudioNP-32

MIDI Reference

Table of Contents

MIDI Functions .................................................................................... 2

MIDI Transmit/Receive Channel Selection ................................................... 2

Local Control ON/OFF .................................................................................. 2

Program Change ON/OFF ............................................................................ 3

Control Change ON/OFF .............................................................................. 3

MIDI Data Format................................................................................. 4

MIDI Implementation Chart................................................................. 7

Summary of content (7 pages)

PAGE 1
MIDI Reference Table of Contents MIDI Functions .................................................................................... 2 MIDI Transmit/Receive Channel Selection ................................................... 2 Local Control ON/OFF .................................................................................. 2 Program Change ON/OFF ............................................................................ 3 Control Change ON/OFF .....................................................
PAGE 2
MIDI Functions You can make detailed adjustments to MIDI settings. MIDI Transmit/Receive Channel Selection In any MIDI control setup, the MIDI channels of the transmitting and receiving devices must be matched for proper data transfer. This parameter enables you to specify the channel on which the instrument transmits or receives MIDI data. Setting the Transmit Channel While holding down the [DEMO] button, press and hold the [METRONOME] button, then press one of the C#1–F2 keys.
PAGE 3
MIDI Functions Program Change ON/OFF Normally the instrument will respond to MIDI program change numbers received from an external keyboard or other MIDI device, causing the same numbered voice to be selected on the corresponding channel (the keyboard voice does not change).
PAGE 4
MIDI Data Format If you’re already very familiar with MIDI, or are using a computer to control your music hardware with computer-generated MIDI messages, the data provided in this section can help you to control the NP-32 NP-12. 1.
PAGE 5
MIDI Data Format 4. PROGRAM CHANGE Data format: [CnH] -> [ppH] CnH = Program event (n = channel number) ppH = Program change number P.C.#=Program Change number NP-32 NP-12 Piano 1 Piano 2 E. Piano 1 E. Piano 2 Organ 1 Organ 2 Strings Vibraphone Harpsichord 1 Harpsichord 2 MSB 0 0 0 0 0 0 0 0 0 0 LSB 122 112 122 122 123 122 122 122 122 123 P.C.# 1 1 6 5 20 20 49 12 7 7 • When program change reception is turned OFF, no program change data is transmitted or received.
PAGE 6
MIDI Data Format 9. SYSTEM EXCLUSIVE MESSAGES (Digital Piano MIDI Format) 10.
PAGE 7
MIDI Implementation Chart YAMAHA [ Digital Keyboard ] Model NP-32 NP-12 MIDI Implementation Chart Function Transmitted Recognized Basic Channel Default Changed 1 1 - 16 1 - 16 1 - 16 Mode Default Messages Altered 3 x ************** 3 x x 0 - 127 ************** 0 - 127 0 - 127 Note Number : True voice Velocity Note ON o 9nH,v=1-127 Note OFF x o 9nH,v=1-127 x After Touch Key's Ch's x x x x Pitch Bend x o Control Change 0,32 1 7 10 11 6,38 64 66,67 71,72,73,74 91,93 96,97 100,101 o x