G Network Player Owner’s Manual This product is designed for use at home to enjoy listening to audio. Before using this product, read the safety instructions described in the supplied Quick Start Guide.
CONTENTS BEFORE USING THE UNIT 4 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 About this manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PLAYING AUDIO 23 Listening to Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Selecting an Internet radio station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setup 35 Configuring various functions (Setup menu) . . . . . . . . . . . . . . . . . . . . . .35 Setup menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Configuring the system settings (Advanced Setup menu) . . . . . . . . . .39 Viewing the firmware version (VERSION). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Initializing the unit (INIT) . . . . . . . . . .
BEFORE USING THE UNIT Accessories About this manual Make sure that the following accessories are supplied with the product. Please note the following when you read this manual: Remote control • This manual explains preparations and operations for everyday users of the unit. Power cord RCA stereo cable • Due to product improvements, specifications and appearance are subject to change without notice. • This manual explains operations performed primarily on the supplied remote control.
FEATURES What you can do with the unit This unit is a network player compatible with a network source such as a media server or mobile device.
Using the MusicCast CONTROLLER app Using the free MusicCast CONTROLLER app installed on a mobile device enables you to use your mobile device like a remote control to set up and operate MusicCastcompatible devices. You can also share and play music on multiple MusicCastcompatilbe devices located in different rooms. Use the MusicCast CONTROLLER app to configure a network (MusicCast network) as shown below: For more information on MusicCast CONTROLLER, visit the following website: http://www.yamaha.
Part names and functions Front panel 1 2 3 4 5 67 8 9 0 A SELECT ENTER SOURCE MUTE PUSH RETURN Wi Fi BLUETOOTH USB CONNECT 5V A 1 z (power) Turns on/off the unit. 2 Power indicator Indicates the unit’s power status. Brightly lit: Power is on Dimly lit: Standby mode Off: Power is off 3 USB jack Used to connect a USB device (page 24). 4 Display Shows information about the operational status of this unit. 5 MUTE Blinks when audio is muted.
Rear panel ANALOG OUT DIGITAL OUT NETWORK AC IN COAXIAL R 1 OPTICAL 2 3 4 5 6 * Illustration above shows Europe model. 1 ANALOG OUT connectors Output stereo analog audio signals. Connect the unit to your amplifier or audio system using the RCA stereo cable (supplied) (page 11). 2 DIGITAL OUT (COAXIAL) connector Outputs digital audio signals. Connect the unit to your amplifier or audio system using a coaxial digital audio cable (commercially available) (page 11).
Remote control 1 Remote control signal transmitter Transmits infrared signals to the main unit. 1 2 3 4 MUTE 5 6 7 8 9 2 z (power) Switches this unit between on and standby mode. 3 DIMMER Enables you to adjust the brightness of the display to 5 levels. Each press of the button changes the brightness. DIMMER PRESET 1 2 3 4 5 6 7 8 9 10 MEMORY HOME REPEAT SHUFFLE NOW PLAYING NET USB BLUETOOTH 4 MUTE Turns mute on or off.
E HOME Moves directly to the top level of the menu when you are selecting music files, folders, etc. This can be convenient if you want to navigate the menu levels quickly. MUTE PRESET 2 3 4 5 6 7 8 9 10 MEMORY HOME REPEAT SHUFFLE NOW PLAYING NET USB BLUETOOTH G NOW PLAYING Displays the song information while you are selecting or browsing music files, folders, etc.
PREPARATION 1 Connecting to an amplifier CAUTION • Do not plug the power cords of this unit and all other connected devices into AC outlets until all connections are complete. ANALOG OUT DIGITAL OUT NETWORK AC IN R COAXIAL OPTICAL RCA stereo cable (supplied) Coaxial digital audio cable (commercially available) Optical digital cable (commercially available) Amplifier * Illustration above shows Europe model.
2 Preparing to connect to a network On this unit, you can tune in to an Internet radio station, or play music files that are stored on your PC or a Digital Living Network Alliance (DLNA) server (such as a Network Attached Storage (NAS) device). Connecting a network cable To use a wired network, connect the unit to your router with a commercially-available STP network cable (CAT-5 or higher straight cable).
3 Connecting the power cord After all the connections are complete, connect the supplied power cord to the AC IN jack on this unit, and then plug into a home AC outlet. 4 Turning on the power to the unit To turn on the power to the unit, press z (power) on the front panel. power cord (supplied) To an AC wall outlet SELECT ENTER SOURCE PUSH RETURN Wi Fi USB BLUETOOTH CONNECT This unit (rear) 5V A z (power) AC IN * Illustration above shows Europe model.
5 Connecting the unit to the network Select a connection method that is suitable for your environment. This section describes how to use the MusicCast CONTROLLER app to connect the unit to a wireless network. If you want to connect the unit to a wireless network without using MusicCast CONTROLLER, refer to page 16 for more information. To use MusicCast CONTROLLER while the unit is connected to a network by cable, perform Steps 1 through 4 in the section “Connecting to a network using MusicCast CONTROLLER”.
4 Follow the instructions on the display of the mobile device to operate MusicCast CONTROLLER to make the network settings. Now the unit is registered with MusicCast and the network settings are complete. Use MusicCast CONTROLLER to play the music. NOTE • To set up additional MusicCast-compatible devices, tap the icon (Settings) in the upper-right corner of the MusicCast CONTROLLER screen, and then select “Add New Device”. Tap here to start settings.
Connecting to a network using another method MUTE You can connect the unit to a wireless network without using MusicCast CONTROLLER. DIMMER 2 SHARE Wireless(WAC) • Sharing the iOS device setting (page 16) 3 • Using the WPS push button on the router (page 18) 4 5 6 7 8 9 10 MEMORY HOME REPEAT SHUFFLE NOW PLAYING NET USB BLUETOOTH • Manual setup (page 19) 6 You can easily setup a wireless connection by applying the connection settings of your iOS device (iPhone) to this unit.
8 Make sure that the “Network” field is set to your preferred network, and then tap “Next”. Tap here to start setup. Currently-selected network When the setup is complete, the unit will automatically connect to the selected network (access point).
Using the WPS push button on the router MUTE You can use the WPS button on the wireless LAN router (access point) to begin setting up a wireless connection. DIMMER NOTE PRESET 1 2 3 4 5 6 7 8 9 10 MEMORY HOME REPEAT SHUFFLE NOW PLAYING NET USB BLUETOOTH • This configuration does not work if the encryption method of your wireless LAN router (access point) is WEP or WPA2-TKIP. In this case, use another connection method. 1 2 Press SETUP.
Manual setup MUTE You can connect this unit to a wireless network manually. Before performing the following procedure, verify the encryption method and security key for the wireless LAN router (access point). DIMMER PRESET PRESET 1 2 3 4 5 6 7 8 9 10 MEMORY HOME 1 2 Use the cursor keys (/) to select “Network”, and then press ENTER.
Use the cursor keys (/) to select “Connect 12 [ENT]”, and then press ENTER. MUTE The connection process starts. DIMMER If “Not connected” appears, check the SSID and security key for the wireless router (access point) and repeat this procedure from Step 6. PRESET 1 2 3 4 5 6 7 8 9 10 MEMORY HOME REPEAT SHUFFLE NOW PLAYING NET USB BLUETOOTH 13 Press SETUP to complete the setting.
Connecting a mobile device to the unit directly (Wireless Direct) MUTE DIMMER PRESET PRESET 1 2 The Wireless Direct connection enables you to use this unit as a wireless network access point, to which you can connect your mobile devices directly.
11 Configure the Wi-Fi settings for your mobile device. MUTE For more information, refer to the instruction manual for the mobile device. DIMMER a Enable the Wi-Fi function on the mobile device. b Select the unit’s SSID (that you viewed in Step 5) from the list of available access points. PRESET 1 2 3 4 5 6 7 8 9 10 MEMORY HOME REPEAT SHUFFLE NOW PLAYING NET USB BLUETOOTH c When you are prompted to enter a password, enter the security key that you set in Step 9.
PLAYING AUDIO MUTE DIMMER Listening to Internet radio PRESET 1 2 3 4 5 6 7 8 9 This unit enables you to listen to Internet radio stations. NOTE 10 MEMORY HOME REPEAT SHUFFLE NOW PLAYING NET USB BLUETOOTH HOME • To use this function, the unit must be connected to the Internet. You can verify whether the network parameters (such as the IP address) are properly assigned to the unit under “Network” (page 36) in the Setup menu.
Playing music files stored on your USB device MUTE DIMMER You can play music files stored on your USB device on the unit. NOTE PRESET 1 2 3 4 5 6 7 8 9 • For information on supported USB storage devices, please refer to “Supported devices and file formats” (page 46). Connecting a USB storage device Playing songs stored on a USB storage device Follow the procedure below to select a song to play stored on a USB storage device.
Use the following remote control keys to navigate the menu and to control transport functions. MUTE DIMMER Available keys Function Cursor keys Select a music file or folder. ENTER Starts playing the selected music file. Selects the next lower level of the menu if pressed while a folder is selected. RETURN Selects the next higher level of the menu.
Playing music files stored on a media server (PC/NAS) You can play music files stored on your PC or DLNA-compatible Network Attached Storage (NAS) device on the unit. NOTE • To use this function, the unit and the PC must be connected to the same router. You can verify whether the network parameters (such as the IP address) are properly assigned to the unit in the “IP” for “Information” under “Network” in the Setup menu (page 36). • Audio may be interrupted while using a wireless network connection.
Selecting and playing music stored on a PC (or server) MUTE DIMMER Available keys Follow the procedure below to select a song to play stored on a PC (or server). PRESET 1 2 Use the following remote control keys to control playback and other transport functions. 3 4 5 6 7 8 9 10 MEMORY HOME REPEAT SHUFFLE NOW PLAYING NET USB BLUETOOTH NOTE SHUFFLE 1 Press NET repeatedly to select “Server” as the source.
Listening to music via AirPlay You can use the AirPlay function to play iTunes or iPhone music files via a network. iTunes Playing a song from iTunes/iPhone Follow the procedure below to play the music from iTunes or iPhone on the unit. 1 Start iTunes, or display the Music playback screen on the iPhone. Once the iTunes or iPhone recognizes the unit, the AirPlay icon appears.
Use the following remote control keys to navigate the menu and transport function. MUTE DIMMER Available keys pe Function Starts or pauses playback. PRESET 1 2 3 4 5 6 7 8 9 10 MEMORY HOME REPEAT SHUFFLE NOW PLAYING NET USB BLUETOOTH s Playback control keys b/w f/a Stops playback. Skips back to the top of the currently-playing song (or the previous song if pressed continuously); Skips forward to the next song. REPEAT Changes the repeat settings.
Listening to music via Bluetooth MUTE DIMMER Playing audio from Bluetooth devices on the unit PRESET 1 2 3 4 5 6 7 8 9 10 MEMORY HOME REPEAT SHUFFLE NOW PLAYING NET USB BLUETOOTH NOTE • If you are prompted to enter a passkey, enter the number “0000”. • The initial network name of the unit is “NP-S303 XXXXXX”. You can play music files stored on a Bluetooth device (such as a smartphone) on the unit.
Playing audio from this unit through Bluetoothcompatible speakers or headphones 4 Tap in the MusicCast CONTROLLER app’s playback screen. You can listen to audio (that is being played on the unit) through Bluetooth-compatible speakers or headphones. To do this, you will use the MusicCast CONTROLLER app (installed on your mobile device) to transmit audio to Bluetooth-compatible speakers or headphones. Tap here. 5 Tap “Bluetooth Transmission”. Tap here.
Useful functions MUTE DIMMER PRESET PRESET 1 2 3 4 5 6 7 8 9 10 MEMORY HOME REPEAT SHUFFLE NOW PLAYING NET USB BLUETOOTH Preset number keys MEMORY Switching information on the display Registering favorite content (Preset function) You can switch information shown on the display, such as playback information.
Recalling a preset content MUTE You can select an audio file from the registered preset numbers. DIMMER PRESET PRESET 1 2 3 4 5 6 7 8 9 10 MEMORY HOME REPEAT SHUFFLE NOW PLAYING NET USB BLUETOOTH Preset number keys MEMORY 1 Press PRESET j / i or the preset number keys to specify the preset number to select the content to which you want to listen. A few seconds after you select the preset number, playback will start.
Enabling/disabling automatic playback MUTE You can enable (or disable) the automatic playback function so that playback will (or will not) automatically start immediately after the power is turned on or the source is changed. (This function is effective only when the source is “Server” or “USB”.) DIMMER PRESET 1 2 3 4 5 6 7 8 9 10 MEMORY HOME REPEAT SHUFFLE NOW PLAYING NET USB BLUETOOTH 1 2 Press OPTION. Use the cursor keys (/) to select “Auto Playback”, and then press ENTER.
Setup MUTE DIMMER Configuring various functions (Setup menu) PRESET 1 2 3 4 5 6 7 8 9 10 MEMORY HOME REPEAT SHUFFLE NOW PLAYING NET USB Menu options Function This section explains how to configure various functions. Connection Enables you to select a network connection method. 36 1 Information Displays the unit’s network information. 36 Menu IP Address Enables you to configure the network parameters (such as IP address).
❑ IP Address Network The Network menu enables you to configure network parameters. Enables you to configure the network parameters (such as IP address). DHCP ❑ Connection This parameter specifies whether a DHCP server will be used. Enables you to select a network connection method. Wired Select this option if you connect the unit to a network using a commerciallyavailable network cable (Page 12). Off A DHCP server will not be used. You must configure network parameters manually.
❑ DMC Control ❑ Network Name Enables or disables DLNA-compatible Digital Media Controllers (DMC) to control playback. Enables you to edit the the unit’s name as displayed on other network devices. Disable Disables DMCs to control playback. Enable (default) Enables DMCs to control playback. NOTE • A Digital Media Controller (DMC) is a device that enables you to control other network devices through the network.
Bluetooth This menu enables you to configure the Bluetooth settings of the unit. ❑ On/Off AutoPowerStby (Auto Power Standby) This menu setting enables or disables the Auto Power Standby function. If you select “On”, the unit will automatically enter standby mode if you do not operate the unit or play any file for the specified time. Enables or disables the Bluetooth function. Off Disables the Bluetooth function. On (default) Enables the Bluetooth function.
Configuring the system settings (Advanced Setup menu) You can change the system settings from the front panel. Initializing the unit (INIT) You can initialize the unit to restore the default settings. Settings SELECT ENTER SOURCE PUSH RETURN Wi Fi USB BLUETOOTH CANCEL (default) Does not initialize the unit. NETWORK Initializes all network, Bluetooth, and USB settings. Initialization will also clear all presets for the network and USB devices (page 32). All Initializes all settings on the unit.
Updating the unit’s firmware via the network MUTE DIMMER New firmware that provides additional features or product improvements is released as needed. If the unit is connected to the Internet, you can download the latest firmware via the network and update it. For details on how to update, visit the Yamaha website.
APPENDIX Troubleshooting Refer to the table below if the unit fails to function properly. If your problem is not listed below, or if the symptoms persist after you follow the instructions below, turn off the power to the unit by pressing z (power) on the front panel, disconnect the power cord, and contact your nearest authorized Yamaha dealer or service center. General Problem The power does not turn on. Cause The protection circuitry has been activated three times consecutively.
Bluetooth Problem Unable to pair the unit with the Bluetooth device. No sound can be heard, or the sound cuts off intermittently. 42 Cause Solution Page The Bluetooth function on the unit is disabled. Set “Bluetooth” in the Setup menu to “On”. 38 Another Bluetooth device is already connected to this unit. Disconnect the Bluetooth device that is currently paired, and then pair with the desired Bluetooth device. 30 The unit and the Bluetooth devices are too far apart.
USB/Network Problem Cause Solution Page The unit does not recognize the USB device. The USB device may not be properly connected to the USB jack. Turn off the power on this unit, and reconnect the USB device. 24 You may be using a USB device that is not formatted as FAT16/32. Be sure to use a USB device formatted as FAT16/32. 46 The folders and files on the USB device are not displayed. The data on the USB device may have been encrypted. Be sure to use a USB device that has not been encrypted.
Problem 44 Cause Solution Page The router’s network separator function may be blocking access to the unit. If you are connecting an iPhone to the unit, use an SSID that allows access to the unit. (Try to connect to the Primary SSID.) — The iPhone does not detect the unit when using AirPlay. You may be using a router that supports multiple SSIDs. The unit is not detected when using a dedicated application on a mobile device. The unit and the mobile device are not on the same network.
Display messages Message Meaning Solution Access denied Access to the PC (or server) has been denied. Modify the media sharing settings so that the unit will be able to access the folders on the PC (or server) (page 26). Access error Unable to access the USB device. Turn off the power to the unit, turn it on again, and then reconnect the USB device. If the problem persists, move the music files to another USB device and try again.
Supported devices and file formats The following devices and file formats can be used by the unit. File formats ❑ USB, PC/NAS Supported devices File Sampling frequency (kHz) WAV * 32/44.1/48/ 88.2/96/ 176.4/192 16/24 - 2 ✔ ❑ USB storage device MP3 32/44.1/48 - 8 - 320 2 - • This unit supports USB mass storage class devices (e.g., flash memories or portable audio players) using the FAT16 or FAT32 format. WMA 32/44.1/48 - 8 - 320 2 - MPEG-4 AAC 32/44.
Trademarks The trademarks used in this manual are as follows. The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®. The Wi-Fi Protected Setup™ Identifier Mark is a certification mark of Wi-Fi Alliance®. Supports iOS 7 or later for setup using Wireless Accessory Configuration.
Specifications The specifications of this unit are as follows. Network General Output Jacks • Compatible with DLNA ver. 1.5 • Power Supply • Analog audio x 1 (RCA Unbalanced) • Digital audio Optical x 1 Coaxial x 1 • AirPlay supported • Internet Radio Wireless Network [Canada model] ............................................. .AC 120 V, 60 Hz [General model] ..................................AC 110-240 V, 50/60 Hz [Australia model]............................................. AC 240 V, 50 Hz [U.
Yamaha Global Site http://www.yamaha.com/ Yamaha Downloads http://download.yamaha.
