Owner’s Manual

42
Bluetooth
Problem Cause Solution Page
Unable to pair the unit with the Bluetooth
device.
The Bluetooth function on the unit is disabled. Set “Bluetooth” in the Setup menu to “On”. 38
Another Bluetooth device is already connected to this unit. Disconnect the Bluetooth device that is currently paired, and then pair
with the desired Bluetooth device.
30
The unit and the Bluetooth devices are too far apart. Move the Bluetooth device closer to the unit. —
A device emitting electromagnetic waves (such as a microwave oven,
a wireless device and so on) may be located nearby.
Use this unit further away from any devices that emit electromagnetic
waves.
—
Your Bluetooth device does not support the A2DP protocol. Use a Bluetooth device that supports the A2DP protocol. —
The connection profile registered in the Bluetooth device may not be
functioning correctly for some reason.
Delete the Bluetooth profile in the Bluetooth device, and then connect
the Bluetooth device to this unit.
—
The passkey of the devices, such as a Bluetooth adaptor, that you want
to pair with the unit is other than “0000”.
Use a connecting device with a passkey “0000”.
—
No sound can be heard, or the sound
cuts off intermittently.
The volume level of the Bluetooth device is too low. Increase the volume level of the Bluetooth device. —
The Bluetooth device is not set to send audio signals to this unit. On the Bluetooth device, select this unit as the audio output destination. 30
The Bluetooth connection has been cut. Perform Bluetooth connection operations again. 30
The unit and the Bluetooth devices are too far apart. Move the Bluetooth device closer to the unit. —
A device emitting electromagnetic waves (such as a microwave oven,
a wireless device and so on) may be located nearby.
Use this unit further away from any devices that emit electromagnetic
waves.
—