Quick Start Guide

En 13

English

If you connect the unit to a wireless network and use the Bluetooth function, set the

wireless antenna in the upright position.

NOTE

• Do not apply excessive force to the wireless antenna. Doing so might damage the antenna.

After all the connections are complete, connect the supplied power cord to the AC IN

jack on this unit, and then plug into a home AC outlet.

To turn on the power to the unit, press z (power) on the front panel.

When you turn on the power to the unit for the first time after you purchase or initialize it,

the unit will indicate “WAC” on the display.

Press the RETURN key to clear this indication and proceed to the next page.

WAC (Wireless Accessory Configuration)

NOTE

• “WAC” is a function that enables the unit to share the network settings of an iOS device (iPhone) to

facilitate connection to a wirelesss network.

For more information, refer to the Owner’s Manual.

2 Preparing a wireless antenna

3 Connecting the power cord

AC IN

To an AC wall outlet

This unit (rear)

power cord (supplied)

* Illustration above shows Europe model.

4 Turning on the power to the unit

USB

BLUETOOTH

RETURNSOURCE

CONNECT

SELECT

PUSH

ENTER

z (power)

NP-S303 XXXXXX

WAC