Operation Manual

Voice Settings
Owner’s Manual
58
Reference
Touch Response Sensitivity
(NP-V80)
You can adjust the keyboard’s sensitivity to dynamics
in four steps.
1
Press the [FUNCTION] button.
The currently selected function will appear in the
display.
2
Press the CATEGORY [ ] and [ ] but-
tons as many times as necessary to
select the Touch Sensitivity item
“TouchSns”.
“TouchSns” will appears in the display for a few
seconds, and the currently selected touch sensitiv-
ity will be displayed.
3
Use the dial in response to keyboard
dynamics to select a touch sensitivity
setting between 1 and 4.
Higher values produce greater (easier) volume
variation in response to keyboard dynamics— i.e.
greater sensitivity. When touch sensitivity is set
to 4 (Off), all notes will be played at the same
volume no matter how hard or softly you play the
keys.
Touch Response Sensitivity
(NP-V60)
When touch response is on you can adjust the key-
board’s sensitivity to dynamics in three steps.
1
Press the [TOUCH ON/OFF] button to
turn touch response on.
The [TOUCH ON/OFF] button alternately turns
touch response on and off.
The touch response icon will appear in the dis-
play when touch response is on.
When touch response is set to off, all notes will
be played at the same volume no matter how hard
or softly you play the keys.
2
Press and hold the [TOUCH ON/OFF]
button for longer than a second so that
the Touch Sensitivity item appears.
“TouchSns” will appear in the display for a few
seconds, and the currently selected touch sensitiv-
ity will be displayed.
3
Use the dial in response to keyboard
dynamics to select a touch sensitivity
setting between 1 and 3.
Higher values produce greater (easier) volume
variation in response to keyboard dynamics—i.e.
greater sensitivity.
• The initial default touch sensitivity setting is “2”.
f
r
TouchSns
2
Medium
Touch Sensitivity
NOTE
• The initial default touch sensitivity setting is “2”.
Touch response icon
TouchSns
2
Medium
Touch Sensitivity
Hold for longer
than a second.
NOTE