AL NS-IW470 CONTENTS CONSUMER PRECAUTIONS 2 UNPACKING TOOL NEEDED SPEAKER PLACEMENT INSTALLATION .00 CONNECTIONS PAINTING THE SPEAKER FRAME AND GRILL ADJUSTING THE MID-HIGH LEVEL VOLUME CONTROL SPECIFICATIONS .
Fed theses precautions carefully before installing your NS-W470 speaker. = Before you begin installation, read this owner's manual and consul your local building codes. If vou have any doubts or reservations, contact your denier or a qualified audiovisual installer. = YAMAHA recommends installing the speaker only in two-by-four wood frame or similar construction. The instructions provided in this owner's manual are intended specifically for this type of wall construction.
After unpacking, sack that the lowing stems are contained. NS-W470 Speaker TEMPLATE Paint Protective Cutout template x 1 Cover 2 Glue Strip ax 2 Small level Sturdy wire {such 25 a coat hanger) Philips screwdriver + Stereo For best stereo performance, install the okt and right speakers at legal distances from the listening position. Each speaker should be sarsaparilla by 2 distance The center of the speaker should be placed at the listener's ear love.
= Conn act the screw-types Input terminals al the rear of the speakers to the speaker output terminals of the abrasive. » Connect the terminals on the relevance and speakers using the corresponding SIDS of the cable. Connect the terminals on both components using the tither side of the cable. Receiver HEADWATERS Iotas: » Make sure halt the bare wires are not douching gate other as this could damage the speaker and receiver.