UB NS-P220 HOME CINEMA 5.
• Explanation of Graphical Symbols CAUTION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FCC INFORMATION (for US customers only) 1. 2. 3. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used.
UNPACKING After unpacking, check that the following items are contained.
Thank you for selecting this YAMAHA NS-P220 Speaker Package. CAUTION: Read this before operating your unit. ● ● ● ● ● To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install the speakers in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose the speakers to rain or water.
For U.K. customers SPECIAL INSTRUCTIONS FOR U.K. MODEL If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.
SETTING UP THE SPEAKERS Before making connections, place all speakers in their respective positions. The positioning of the speakers is important because it controls the whole sound quality of this system. Place the speakers depending on your listening position by following the instructions below. Speaker configuration Placing speakers This speaker package employs a 6 speaker configuration: 2 main speakers, 2 rear speakers, a center speaker and a subwoofer.
m Mounting the main and center speakers Place the main speakers on a rack or on a shelf. Place the center speaker on top of the TV, on a shelf or inside the TV rack so that it is stable. To obtain more stability and usefulness, we recommend that you mount these speakers on the provided mounting brackets (type A). 1 Mounting bracket (type A) Screw (type A) To mount the speakers on the mounting brackets (type A) 1 Attach the bracket to the bottom of the speaker by using the provided screw (type A).
m Mounting the rear speakers Mount the rear speakers on a shelf, rack or directly on the floor, or hang them on the wall. 1 Mounting bracket (type B) To mount the rear speakers on a wall by using the provided mounting brackets (type B) Note It is recommended that you connect the speaker cords to the speaker’s terminals before attaching the bracket to the speaker. Screw (type B) 2 1 Attach the bracket to the bottom of the speaker by using the provided screw (type B).
CONNECTIONS Caution: Plug in the subwoofer and other audio/video components after all connections are completed.
● Connect the main, center and rear speakers to the speaker output terminals of your amplifier with the provided speaker cords. * The provided speaker cords have labels marked FRONT L, FRONT R, CENTER, REAR L or REAR R. Connect each speaker cord to the corresponding speaker by following the figure on page 6. * Connect each speaker making sure not to reverse the polarity (+, –). If the speaker is connected with reversed polarity, the sound will be unnatural and lack bass.
m How to connect speaker cords to the input and output terminals of the speakers For connections, keep the speaker cords as short as possible. Do not bundle or roll up the excess part of the cords. If the connections are faulty, no sound will be heard from the speakers. Main/center/rear speakers How to Connect: One side of the provided speaker cord has a white broken line and the other side has no line.
m Connecting the subwoofer to speaker output terminals of the amplifier If your amplifier has only one set of main speaker output terminals Connect the speaker output terminals of the amplifier to the INPUT1 terminals of the subwoofer, and connect the OUTPUT terminals of the subwoofer to the main speakers.
USING THE SUBWOOFER (SW-P201) m Controls and their functions VOLTAGE SELECTOR Rear panel 8 220V-240V 110V-120V POWER 1 VOLTAGE SELECTOR POWER ON 220V-240V ON 110V-120V OFF OFF VOLUME 7 2 3 VOLUME STANDBY-RED ON-GREEN 0 I0 AUTO STANDBY STANDBY-RED ON-GREEN 0 I0 AUTO STANDBY HIGH LOW OFF HIGH LOW OFF INPUT2 4 /MONO INPUT2 /MONO INPUT1 FROM AMPLIFIER OUTPUT 5 TO SPEAKERS 6 1 2 3 POWER switch Set this switch to the ON position to turn on the power of the subwoofer.
Automatic power-switching function If the source being played is stopped and the input signal is cut off for 7 to 8 minutes, the subwoofer automatically switches to the standby mode. (When the subwoofer switches to the standby mode, the power indicator lights up in red.) When you play a source again, the power of the subwoofer turns on automatically by sensing audio signals input to the subwoofer. This function operates by sensing a certain level of low frequency input signal.
ADVANCED YAMAHA ACTIVE SERVO TECHNOLOGY (for SW-P201) The theory of Yamaha Active Servo Technology has been based upon two major factors, the Helmholtz resonator and negative-impedance drive. Active Servo Processing speakers reproduce the bass frequencies through an “air woofer”, which is a port or opening in the speaker’s cabinet. This opening is used instead of, and performs the functions of, a woofer in a conventionally designed speaker system.
TROUBLESHOOTING Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions given below do not help, disconnect the power cord and contact your authorized YAMAHA dealer or service center. Problem Cause What to Do No sound. Speaker cords are not connected securely. Connect them securely. Sound level is too low. Speaker cords are not connected correctly.
SPECIFICATIONS NX-220P, NX-C220 SW-P201 Type ............... 2-way acoustic-suspension speaker system Magnetically shielded type Type ............... Advanced Yamaha Active Servo Technology Driver ............................................. 8 cm (3-1/8”) cone type 1.9 cm (3/4”) balanced dome type Driver ...................... 16 cm (6-5/16”) cone woofer (JA1678) Magnetically shielded type Amplifier Output .................................................... 50W/5Ω Nominal Input Power ...............
YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR, 22-34, 25462 RELLINGEN, BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.