UB NS-P326 (NS-P326: NS-M104 + NS-E114 + NS-C104 + SW-P201) HOME CINEMA 6.1CH SPEAKER PACKAGE OWNER’S MANUAL NS-P326(UB)-PRE(3.6)d 1 02.3.
• Explanation of Graphical Symbols CAUTION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
18 19 Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
UNPACKING After unpacking, check that the following items are contained. Main speakers Subwoofer Rear/rear center speakers Subwoofer cable Speaker cables [4m] [15m] X3 X3 Fasteners Center speaker X4 Pads IV NS-P326(UB)-PRE(3.6)d 4 02.3.
English Thank you for selecting this YAMAHA NS-P326 Speaker Package. CAUTION: Read this before operating your unit. ● ● ● ● ● To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install the speakers in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors).
For U.K. customers SPECIAL INSTRUCTIONS FOR U.K. MODEL If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.
Before making connections, place all speakers in their respective positions. The positioning of the speakers is important because it controls the whole sound quality of this system. Place the speakers depending on your listening position by following the instructions below. Speaker configuration Placing speakers This speaker package employs a 7 speaker configuration: 2 main speakers, 2 rear speakers, a center speaker, a rear center speaker and a subwoofer.
䡵 Placing the center speaker Place the speaker on TV whose top is flat or on the floor under the TV or inside the TV rack so that it is stabilized. When placing the speaker on top of the TV, to prevent the speaker from falling down, put the provided fasteners at four points on the bottom of the speaker and the top of the TV. Fastener Peel off the seal Screen Notes ● Do not place the speaker on top of the TV whose area is smaller than the bottom area of the speaker.
English 䡵 Mounting the rear and rear center speakers Mount the rear and rear center speakers on a shelf, rack or directly on the floor, or hang them on the wall. 1 Holes To mount the rear and rear center speakers on a wall by using the holes on the speakers’ back panels 2 Diam. 3.5 to 4 mm Min.
CONNECTIONS Caution: Plug in the subwoofer and other audio/video components after all connections are completed.
English ● Connect the main, center, rear and rear center speakers to the speaker output terminals of your amplifier with the provided speaker cables. * Connect each speaker making sure not to reverse the polarity (+, –). If the speaker is connected with reversed polarity, the sound will be unnatural and lack bass. * For the main and rear speakers only, connect one speaker to the left (marked L) terminals of your amplifier, and another speaker to the right (marked R) terminals.
䡵 How to connect speaker cables to the input and output terminals of the speakers For connections, keep the speaker cables as short as possible. Do not bundle or roll up the excess part of the cables. If the connections are faulty, no sound will be heard from the speakers. Main/center/rear/rear center speakers Before connecting One side of the provided speaker cable has a white broken line and the other side has no line.
English 䡵 Connecting the subwoofer to speaker output terminals of the amplifier If your amplifier has only one set of main speaker output terminals Connect the speaker output terminals of the amplifier to the INPUT1 terminals of the subwoofer, and connect the OUTPUT terminals of the subwoofer to the main speakers.
USING THE SUBWOOFER (SW-P201) 䡵 Controls and their functions VOLTAGE SELECTOR 8 220V-240V 110V-120V Rear panel POWER VOLUME VOLTAGE SELECTOR 1 ON POWER 7 220V-240V ON 110V-120V OFF OFF 2 STANDBY-RED ON-GREEN 3 0 I0 4 AUTO STANDBY HIGH LOW OFF INPUT2 I0 HIGH LOW OFF VOLUME STANDBY-RED ON-GREEN 0 AUTO STANDBY INPUT2 /MONO /MONO INPUT1 FROM AMPLIFIER OUTPUT 5 TO SPEAKERS 6 1 2 3 POWER switch Set this switch to the ON position to turn on the power of the subwoofer.
English Automatic power-switching function If the source being played is stopped and the input signal is cut off for 7 to 8 minutes, the subwoofer automatically switches to the standby mode. (When the subwoofer switches to the standby mode, the power indicator lights up in red.) When you play a source again, the power of the subwoofer turns on automatically by sensing audio signals input to the subwoofer. This function operates by sensing a certain level of low frequency input signal.
ADVANCED YAMAHA ACTIVE SERVO TECHNOLOGY (for SW-P201) The theory of Yamaha Active Servo Technology has been based upon two major factors, the Helmholtz resonator and negative-impedance drive. Active Servo Processing speakers reproduce the bass frequencies through an “air woofer”, which is a port or opening in the speaker’s cabinet. This opening is used instead of, and performs the functions of, a woofer in a conventionally designed speaker system.
English TROUBLESHOOTING Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions given below do not help, disconnect the power cord and contact your authorized YAMAHA dealer or service center. Cause Problem What to Do No sound. Speaker cables are not connected securely. Connect them securely. Sound level is too low. Speaker cables are not connected correctly.
SPECIFICATIONS 䡵 NS-M104 䡵 SW-P201 Type .............................. 2-way bass-reflex speaker system Magnetic shielding type Type ............... Advanced Yamaha Active Servo Technology Driver .............................................. 12 cm (5”) cone woofer 2.5 cm (1”) balanced dome tweeter Driver ...................................... 16 cm (6-5/16”) cone woofer Magnetic shielding type Amplifier Output .................................................... 50W/5Ω Impedance .....................
YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR, 22-34, 25462 RELLINGEN, BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.
