manual
English
3
En
Installing the speakers
Wall-mounting the front and
surround speakers
You can mount the front or surround speakers on a
wall as follows. The front speakers can be mounted
vertically or horizontally.
1
Install screws into a solid wall or wall support
as shown below. Use 3.5 to 4 mm (1/8")
diameter self-tapping screws.
2
Hang each speaker by its keyhole slots onto
the protruding screws.
Note
•Make sure the shaft of the screw is seated in the
narrow part of the keyhole slot. Otherwise, the
speaker may fall.
Warnings
•Each front speaker weighs 1.0 kg (2.2 lbs.) and
each surround speaker weighs 0.45 kg (1 lbs.). Do
not mount the speakers on thin plywood or on a
wall with a soft surface material. Otherwise, the
screws may pull out of the surface and the
speakers may fall, possibly damaging the speakers
or causing personal injury.
•Do not affix the speakers to a wall using nails,
adhesives, or unstable hardware. Long-term use
and vibration may cause the speakers to fall.
•To avoid accidents resulting from tripping over
loose speaker cables, affix the cables to the wall.
•Mount the speakers in a wall location that will be
unlikely to result in injury to an individual’s head.
■
Front speakers
■
Surround speakers
Minimum
20 mm (3/4")
150 mm
(5-7/8")
Wall/wall
support
6 mm
(1/4")
150 mm
(5-7/8")
Vertical
Horizontal
45 mm
(1-3/4")
Wall/wall
support
6 mm
(1/4")
Minimum
20 mm (3/4")