GB NS-P210 HOME CINEMA 5.1CH SPEAKER PACKAGE 5.
UNPACKING DEBALLAGE AUSPACKEN UPPACKNING DISIMBALLAGGIO DESEMBALAJE UITPAKKEN ● ● ● ● ● ● ● After unpacking, check that the following items are contained. Après le déballage, vérifier que les pièces suivantes sont incluses. Nach dem Auspacken überprüfen, ob die folgenden Teile vorhanden sind. Kontrollera efter det apparaten packats upp att följande delar finns med. Verificare che tutte le parti seguenti siano contenute nell’imballaggio dell’apparecchio.
English Thank you for selecting this YAMAHA NS-P210 Speaker Package. CAUTION: Read this before operating your unit. ● ● ● To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install the speakers in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose the speakers to rain or water.
COMPONENTS OF THE PACKAGE The speaker package “NS-P210” is designed for use in a multi-channel audio system such as a home theater system. The package includes two pairs of main/rear speakers (NX-210P), a center speaker (NX-C210) and a subwoofer system (SWP201).
Before making connections, place all speakers in their respective positions. The positioning of the speakers is important because it controls the whole sound quality of this system. Place the speakers depending on your listening position by following the instructions below. Speaker configuration Placing speakers This speaker package employs a 6 speaker configuration: 2 main speakers, 2 rear speakers, a center speaker and a subwoofer. The main speakers are used for main source sound.
m Mounting the main and center speakers Place the main speakers on a rack or on a shelf. Place the center speaker on top of the TV, on a shelf or inside the TV rack so that it is stable. To obtain more stability and usefulness, we recommend that you mount these speakers on the provided mounting brackets (type A). 1 Mounting bracket (type A) Screw (type A) To mount the speakers on the mounting brackets (type A) 1 Attach the bracket to the bottom of the speaker by using the provided screw (type A).
English m Mounting the rear speakers Mount the rear speakers on a shelf, rack or directly on the floor, or hang them on the wall. 1 Mounting bracket (type B) To mount the rear speakers on a wall by using the provided mounting brackets (type B) Note It is recommended that you connect the speaker cords to the speaker’s terminals before attaching the bracket to the speaker. Screw (type B) 2 1 Attach the bracket to the bottom of the speaker by using the provided screw (type B).
CONNECTIONS General information for connections Caution: Plug in the subwoofer and other audio/video components after all connections are completed. ● Connect the main, center and rear speakers to the speaker output terminals of your amplifier with the provided speaker cords. * The provided speaker cords have labels marked FRONT L, FRONT R, CENTER, REAR L or REAR R. Connect each speaker cord to the corresponding speaker by following the figure below.
English m How to connect speaker cords to the input and output terminals of the speakers For connections, keep the speaker cords as short as possible. Do not bundle or roll up the excess part of the cords. If the connections are faulty, no sound will be heard from the speakers. Main/center/rear speakers How to Connect: One side of the provided speaker cord has a white broken line and the other side has no line.
Various ways of connecting the subwoofer m Connecting the subwoofer to line output (pin jack) terminals of the amplifier (The basic way) Connect the main speakers to the speaker output terminals of the amplifier. ● To connect with a YAMAHA DSP amplifier (or AV receiver), connect the SUBWOOFER (or LOW PASS etc.) terminal on the rear of the DSP amplifier (or AV receiver) to the L/MONO INPUT2 terminal of the subwoofer.
English m Connecting the subwoofer to speaker output terminals of the amplifier If your amplifier has only one set of main speaker output terminals Connect the speaker output terminals of the amplifier to the INPUT1 terminals of the subwoofer, and connect the OUTPUT terminals of the subwoofer to the main speakers.
USING THE SUBWOOFER (SW-P201) m Controls and their functions VOLTAGE SELECTOR Rear panel 8 220V-240V 110V-120V POWER 1 VOLTAGE SELECTOR POWER ON 220V-240V ON 110V-120V OFF OFF VOLUME 7 2 3 VOLUME STANDBY-RED ON-GREEN 0 I0 AUTO STANDBY STANDBY-RED ON-GREEN 0 I0 AUTO STANDBY HIGH LOW OFF HIGH LOW OFF INPUT2 4 /MONO INPUT2 /MONO INPUT1 FROM AMPLIFIER OUTPUT 5 TO SPEAKERS 6 1 2 3 E-10 POWER switch Set this switch to the ON position to turn on the power of the subwoofer.
English Automatic power-switching function When you play a source, the power of the subwoofer turns on automatically by sensing audio signals input to the subwoofer. On the other hand, the subwoofer automatically switches to the standby mode if the source being played is stopped or the input signal is cut off for a few minutes. This function operates by sensing a certain level of low frequency input signal. Its sensitivity is high in the HIGH position and low in the LOW position of the AUTO STANDBY switch.
ADVANCED YAMAHA ACTIVE SERVO TECHNOLOGY (for SW-P201) The theory of Yamaha Active Servo Technology has been based upon two major factors, the Helmholtz resonator and negative-impedance drive. Active Servo Processing speakers reproduce the bass frequencies through an “air woofer”, which is a port or opening in the speaker’s cabinet. This opening is used instead of, and performs the functions of, a woofer in a conventionally designed speaker system.
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions given below do not help, disconnect the power cord and contact your authorized YAMAHA dealer or service center. Problem Cause What to Do Power is not supplied even though the POWER switch is set to the ON position. The power plug is not securely connected. Connect it securely. No sound. The VOLUME control is set to 0. Turn the VOLUME control to the right.
SPECIFICATIONS NX-210P, NX-C210 SW-P201 Type ......... Full-range acoustic-suspension speaker system Magnetically shielded type Type ............... Advanced Yamaha Active Servo Technology Driver ............................................. 8 cm (3-1/8”) cone type Driver ...................... 16 cm (6-5/16”) cone woofer (JA1678) Magnetically shielded type Nominal Input Power ................................................. 30W Amplifier Output ....................................................
SPECIFICATIES NX-210P, NX-C210 SW-P201 Type ............................... Full range akoestische-suspensie luidsprekersysteem Type met magnetische afscherming Type ............... Advanced Yamaha Active Servo Technology Driver .................................. 16 cm konus-woofer (JA1678) Type met magnetische afscherming Driver .................................................... 8 cm konus-woofer Versterker-uitgangsvermogen ............................. 50W/5Ω Nominaal ingangsvermogen ...............
