Digital Sound Projector™ Owner’s Manual English for North America
What you can do with this unit Make sure you read precaution in “Safety and Accessory Information” (separate booklet) carefully before using this unit. TV Blu-ray disc player Audio/video device Preparation Installing the unit Connecting a satellite/ cable TV tuner Connecting a Blu-ray disc player p. 19 Connections/Basic settings Operating this unit using a TV’s remote control (HDMI control) Playback p. 11 Basic operation for playback p. 18 p. 30 p.
iPod or USB device over a USB connection (YSP-4300 only) Game console Preparing the remote control Connecting a TV iPod or computer over a wireless connection FM tuning (YSP-4300 only) p. 16 p. 18 Connecting a game console Connecting an indoor FM antenna p. 19 p. 20 Setting appropriate surround effects automatically (IntelliBeam) Playing an iPod or USB device p. 48 CINEMA DSP p. 23 Playing an iPod or computer FM tuning (YSP-4300 only) p. 48 p. 44 Compressed Music Enhancer p. 34 p.
Contents PREPARATION Controls and functions...............................................5 Center unit front panel (front, top)........................................... 5 Center unit rear panel (back) .................................................. 6 Subwoofer rear panel (back)................................................... 7 Front panel display.................................................................. 8 Remote control........................................................................
PREPARATION Controls and functions Center unit front panel (front, top) 9 1 2 3 4 1 2 3 0 5 67 9 PLAYBACK 8 YSP-CU3300 PREPARATION 8 YSP-CU4300 0 4 6 7 1 Remote control sensor 7 STATUS indicator Lights up when the power is turned on, and goes off in the standby mode. 2 Remote control sensor of a TV Receives infrared signals from the TV remote control when the TV Remote Repeater function is enabled (☞p. 12). 3 Wireless module 8 INPUT key Selects the playback component (☞p. 32).
Controls and functions Center unit rear panel (back) 1 2 6 3 4 5 7 8 9 0 1 FM ANTENNA jack (YSP-4300 only) Connect an FM antenna (☞p. 20). 2 INTELLIBEAM MIC jack Connect the supplied IntelliBeam microphone (☞p. 24). 3 INPUT ANALOG L/R jacks For connecting analog cable to the external components (☞p. 19). 4 AUX INPUT DIGITAL jack For connecting a coaxial digital audio cable to the external components (☞p. 19). 5 IR IN/OUT jacks Control expansion jacks for commercial use only.
Controls and functions Subwoofer rear panel (back) 2 PREPARATION 1 A B C A B C 1 2 3 LINK 1 2 3 LINK 3 PLAYBACK 4 1 Group ID switches 2 LINK indicator Shows wireless connection status (☞p. 21). 3 Heat discharge unit Discharges heat generated inside the subwoofer. Do not cover the heat discharge unit. 4 Power cable For connecting to an AC wall outlet (☞p. 20). SETTINGS When the center unit and subwoofer are connected wirelessly, sound is output from the subwoofer (yAired).
Controls and functions Front panel display 1) 1 2 7 8 1 Playback indicators (YSP-4300 only) Lights while music stored on an iPod or USB device connected to the USB jack is playing (☞p. 48, 54). 2 TARGET indicator Lights when target playback mode enabled (☞p. 39). 3 Tuner indicators (YSP-4300 only) Lights up when this unit is tuned into an FM station (☞p. 44). 4 REPEATER indicator Lights when the TV Remote Repeater function is enabled (☞p. 10).
Controls and functions Remote control 1 BEAM key Switches the sound beam output method (☞p. 37). 2 ENHANCER key 1 2 H I Turns Compressed Music Enhancer to on or off (☞p. 33). 3 Input selector keys Select the playback component (☞p. 32). PREPARATION Infrared signal transmitter 4 CINEMA DSP program keys When playback is in surround playback mode, select the CINEMA DSP programs (☞p. 34). 3 5 SURROUND key Switches to surround playback mode (☞p. 34).
Controls and functions a MUTE key Mute the sound (☞p. 32). b SYSTEM MEMORY keys Saves IntelliBeam measurements, speaker volume, and other settings (☞p. 28). c FM key (YSP-4300 only) Switches this unit’s input source to FM radio. d Tuner operation keys (YSP-4300 only) Press to select or register an FM station (☞p. 44). e CH LEVEL key Adjusts the volume balance during playback (☞p. 33). m UNIVOLUME key Turns the UniVolume function on or off (☞p. 40).
Installation To achieve desired surround sound effects, install this unit where there are no objects such as furniture obstructing the path of sound waves, referred to as “sound beam(s)” in this manual (☞p. 14). Depending on the location where the unit is installed, it may be easier to connect external devices such as a TV first. See “Connections” (☞p. 17). • This unit requires sufficient space for heat discharge.
Installation Enjoying surround effects regardless of conditions (My Surround) The My Surround function creates rich surround sound effects in rooms with less than optimal surround sound conditions (☞p. 11). See “Changing the audio output method for surround playback” (☞p. 36, 37) for more information.
Installation Positioning the subwoofer on its side The subwoofer can be laid on its side when positioned on a rack.
Installation Installing this unit This unit outputs sound beam as shown in the illustrations below. Install this unit where there are no obstacles such as furniture obstructing the path of sound beams. Otherwise, the desired surround sound effects may not be achieved. You may install this unit in parallel with the wall or in the corner. Parallel installation Install this unit in the exact center of the wall when it is measured from the left and right corners.
Installation Installing in a non-square room Install this unit so that the sound beams can be reflected off the walls. Irregularly shaped rooms with solid walls on all sides PREPARATION PLAYBACK Irregularly shaped rooms that are open to a hallway on one side SETTINGS Example for installing the unit in living room Objects, such as furniture TROUBLESHOOTING • As sound beams normally pass through tables, tables are not obstacles. And a cupboard installed facing the wall reflects sounds.
Installation Preparing remote control Before installing batteries or using the remote control, be sure to read battery and remote control precautions in “Safety and Accessory Information” (separate booklet).
Connections When external devices such as a TV, Blu-ray disc player, and/or game console are connected, audio and video signals are transmitted as shown below. PREPARATION Audio connection Video connection Audio and video connection This unit: Plays audio from TV broadcasts, Blu-ray discs, etc. PLAYBACK HDMI cable Optical cable HDMI cable Use to connect a TV that does not support audio return channel (ARC) to this unit (☞p. 18).
Connections • Do not connect the power cable until all connections are completed. • Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or jack. Connecting a TV and a Blu-ray disc player For the cable connection, follow the procedure below. 1 HDMI cable (optional) Input the digital audio/video signals of the Blu-ray disc player to this unit. 2 HDMI cable (optional) The digital video of the Blu-ray disc player is reflected on TV.
Connections Connecting a game console or satellite/cable TV tuner HDMI compatible not HDMI compatible PREPARATION External device (example) Connecting cable 1 Satellite/cable TV tuner HDMI cable (optional) 2 Game console HDMI cable (optional) 3 Game console HDMI cable (optional) 4 Satellite/cable TV tuner Optical cable (supplied) Composite video cable (optional) 5 Game console RCA stereo cable (optional) Composite video cable (optional) PLAYBACK 2) To AC wall outlet 5 SETTINGS VIDEO OUT
Connections Connecting the FM antenna (YSP-4300 only) Connect the supplied FM antenna via the FM ANTENNA jack. FM antenna Connecting the wireless subwoofer To connect the subwoofer (NS-WSW160) to the center unit wirelessly (yAired), the same group ID must be assigned to the center unit and subwoofer. The default group ID for both components is A1, enabling wireless connection by simply plugging the subwoofer's power cable into an electrical outlet.
Initial settings Establishing a wireless connection When playing content from a TV or Blu-ray disc player, the center unit transmits audio signals that are received by the subwoofer. When YIT-W12TX is used to play songs stored on an iPod or computer, YIT-W12TX sends audio signals that are received by the center unit and subwoofer. 1 HDMI INPUT 2 TV remote control (example) Switch input sources PLAYBACK The same group ID must be assigned to all components.
Initial settings Selecting the language for menu display 1 2 3 Turn the unit and TV on. Switch the TV’s input to display video input from this unit (☞p. 21). Press and hold the SETUP key until the “OSD LANGUAGE” menu appears on your TV.1) S/T OSD LANGUAGE ENTER ENGLISH DEUTSCH FRANÇAIS ESPAÑOL ITALIANO NEDERLAND РУССКИЙ SVENSKA SETUP 4 Press the S/T key to select the desired language.
Initial settings 1 2 3 Fit in Remove Fit in 4 Place horizontally 5 PLAYBACK Due to differences in room sizes and shapes, positioning of this unit, and the lifestyle of users, settings for each channel must be adjusted in order for this unit to provide the optimal listening experience. This unit is equipped with IntelliBeam, which automatically adjusts settings for each channel. IntelliBeam offers two features, “beam optimization” and “sound optimization”.
Initial settings Using AUTO SETUP (IntelliBeam) Notes • It is normal for loud test tones to be output during the AUTO SETUP procedure. Make sure that there are no children around in the listening room while the AUTO SETUP procedure is in progress. • If there are curtains in your listening room, we recommend following the procedure below. 1 Open the curtains to improve sound reflection. 2 Run “BEAM OPTIMIZE ONLY” (☞p. 26). 3 Close the curtains. 4 Run “SOUND OPTIMIZE ONLY” (☞p. 26).
Initial settings The screen below is displayed after connecting IntelliBeam microphone to the unit.1) 5 AUTO SETUP COMPLETE Please remove the MIC from Sound Projector and the listening position. Press [SYSTEM MEMORY] key to save set-up in the memory. • The measurement results are stored in the internal memory of this unit until you run the AUTO SETUP procedure again or configure the settings manually. • You can save the several measurement results pressing the SYSTEM MEMORY key (☞p. 28).
Initial settings AUTO SETUP via setup menu 1 Place the IntelliBeam microphone at your normal listening position, and press the SETUP key. See “Installing the IntelliBeam microphone” (☞p. 23) for instructions on positioning the IntelliBeam microphone. S/T SETUP X ENTER 2 3 4 Press the S/T key to select “BEAM” and then press the X key.1) Press the S/T key to select “IntelliBeam” and then press the X key.1) Press the S/T key to select one of the items below and then press the X key.
Initial settings If an error message is displayed [ERROR E-1] Press the ENTER key to run the AUTO SETUP procedure again. Or press the X key to continue the measurement. [ERROR E-7] Press the key to turn this unit to the standby mode, then run AUTO SETUP procedure again after turning this unit on. The IntelliBeam microphone is not placed in front of this unit. Position the IntelliBeam microphone in front of this unit and begin measurement again. ERROR E-5: Please check MIC position.
Initial settings Saving this unit’s settings to system memory Three sets of settings can be saved to this unit's memory, enabling quick loading of settings optimized for specific listeners or environmental changes as needed. Refer to the examples below to save IntelliBeam measurement results and settings such as surround setting to system memory, or to load a pre-defined settings. The following settings can be saved to system memory. • Surround playback (☞p. 33), stereo playback (☞p.
Initial settings Saving settings to system memory 2 Hold down the SYSTEM MEMORY 1, 2, or 3 key until “M1 Save?”, “M2 Save?”, or “M3 Save?”, corresponding to the button pressed, is displayed. Press the same SYSTEM MEMORY key again.1) When the SYSTEM MEMORY 1 key is pressed, “M1 Saving” is displayed, and settings are saved. 1 Press the SYSTEM MEMORY 1, 2, or 3 key corresponding to settings to be loaded. If the SYSTEM MEMORY 1 key is pressed, “M1 Load?” will be displayed.
Initial settings Operating the unit by TV’s remote control (HDMI control) What is the HDMI control function? HDMI1 This unit can be operated using a TV's remote control if the TV supports the HDMI control function and is connected to this unit via HDMI cable (e.g. REGZA Link; some TVs excluded). The following 6 functions are supported.1) Remote control of TV (Example) 1. Turn on/off Both the TV and this unit turn on/off at the same time. 2.
Initial settings Setting the HDMI control function Enable the HDMI control function of all components connected to this unit via HDMI cable. For this unit, set “HDMI CONTROL” to “ON” (☞p. 63).2) For external components, refer to the manual supplied with each component.3) 3 Turn off the TV and then turn on it again. 1 2 Turn on an external components, such as a Blu-ray disc player, connected to this unit via HDMI cable.
PLAYBACK Playback features Basic operation for playback 1 2 ENHANCER HDMI1 Input selector keys 3 SURROUND STEREO Press the key to turn on this unit. Turn on components (TV, Blu-ray disc player, game console, etc.) connected to this unit. Select a component by pressing the input selector key corresponding to the connection of external components. Press the HDMI1 key to play audio/video content from a Blu-ray disc player connected via the HDMI IN1 jack.
Playback features This unit supports the following capabilities to enjoy sound based on your preference. • Switching between surround playback, stereo playback, and target playback modes • Compressed Music Enhancer • Volume adjustment for each channel • CINEMA DSP • Switching between surround audio output methods • Surround sound decoder Stereo playback mode Press the STEREO key to switch to stereo playback mode. Press the ENHANCER key to turn the Compressed Music Enhancer function on.
Playback features Enjoying realistic surround sounds (CINEMA DSP) Playback surround sounds using Yamaha’s exclusive CINEMA DSP.1) CINEMA DSP 1 2 SURROUND 1) y CINEMA DSP This unit is equipped with a Yamaha CINEMA DSP (digital sound field processing) chip containing several sound field programs used to enhance your playback experience. Most of the CINEMA DSP programs are precise digital recreations of actual acoustic environments of famous concert halls, music venues, and movie theaters.
Playback features CINEMA DSP options MOVIE (use the MOVIE key to select) Adventure This program reproduces the thrilling environment of the latest action films and lets you feel the dynamic and excitement of fast-moving scenes. Spectacle This program reproduces the wide and grand environment and lets you have added impressions on spectacular scenes with strong visual impacts.
Playback features Changing the audio output method for surround playback BEAM Specify the sound beam output method for surround sound playback. Press the BEAM key to switch the sound beam output method. With 5.1-channel (or 2-channel) input Sound beams are output from 5.1 channels. Choose from 5BEAM (5 Beam), ST+3BEAM (Stereo + 3 Beam), 3BEAM (3 Beam), and MY SUR. (My Surround). With 7.1-channel (or 6.1-channel) input Sound beams are output from 7.1 channels.
Playback features Sound beam output options and characteristics For enjoying surround sound effects on the movie, etc. to the fullest Beam modes for “5.1ch” 5BEAM (5 Beam) Outputs sound beams from the front right and left, center, and surround right and left channels. ST+3BEAM (Stereo + 3 Beam) 3BEAM (3 Beam) Outputs sound beams from the front right and left and center channels. Other channel sources are mixed into the front right and left channels.
Playback features Setting the surround decoder When this unit plays back 2-channel or 5.1-channel sources in the surround mode, surround decoder enables them playback for 7.1-channel.1) You can enjoy a variety of surround sound effects by switching the decoder.2) To enable a surround decoder, press the SURROUND key to select “DSP Off”. Select the desired decoder from the setup menu “SOUND” “MATRIX DECODER”. SURROUND STEREO / See “Setting the setup menu” under “Setup menu” (☞p.
Playback features Delivering sound to a specified location (Target playback mode) To limit sound to the immediate area 1 2 Press the TARGET key. Use the W/X key to adjust beam angle. • Angle to the left increases each time the W key is pressed; angle to the right increases each time the X key is pressed. A maximum angle of 90° in either direction is possible. • When playing content stored on an iPod or USB device connected to the USB jack, press the W/X key while “TARGET” is displayed (YSP-4300 only).
Playback features Using useful features Automatic volume level adjustment (UniVolume) This function automatically compensates for extreme differences in volume for more comfortable listening in the following types of situations. • When switching the channel • When a TV program changed to commercial • When one program is finished and another program started Press the UNIVOLUME key to turn the UniVolume function on.1) Press the key again to turn the function off.
Playback features Saving energy with the Eco function The input source and surround information is displayed. Press the INFO key. Display changes as follows each time the INFO key is pressed. The specific information displayed varies according to the input source. Input source: HDMI1– 4, YIT, TV, OPTICAL, ANALOG, FM3) “ECO ON” is displayed and the front panel display turns off. T Decoder: Current decoder (☞p.
Playback features Settings each input source (Option menu) Option settings can be specified for each input source (HDMI1– 4, TV, OPTICAL, AUX, ANALOG, YIT, FM1), USB1)). The configurable items vary depending on the input source selected. 1 2 Input selector keys Press the input selector key to select the input source that you want configured. Press the OPTION key. The option menu is displayed in the front panel display (it is not displayed on the TV screen).
Playback features Option menu items The following menu items are provided for each input. HDMI1– 4 Menu items TREBLE, BASS, VOLUME TRIM, AUDIO DELAY, AUDIO ASSIGN TV OPTICAL AUX TREBLE, BASS, VOLUME TRIM, AUDIO DELAY ANALOG YIT TV images sometimes lag behind the sound. You can use this function to delay the sound output to synchronize it with the video image.
Playback features FM tuning (YSP-4300 only) The FM tuner of this unit provides the following two modes for tuning. Frequency tuning mode You can tune into a desired FM station by searching its frequency. Preset tuning mode Up to 40 stations can be registered and assigned a preset number. Select a preset number to tune into the station registered with that preset. / ENTER y Tip Adjust the FM antenna connected to this unit for the best reception.
Playback features Receiving weak signal 1 Press the OPTION key. Registering stations automatically The option menu (☞p. 42) appears. 2 Press the S/T key to select “FM MODE” and press the X key.1) Press the S/T key to select “MONO”. The tuner automatically detects FM stations with strong signals and registers the stations. 1 2 Press the FM key. Press the OPTION key. The option menu (☞p. 42) appears. 3 Press the S/T key to select “AUTO PRESET” and then press the X key.
Playback features Registering stations manually You can manually register FM stations. 1 2 Tune into the desired FM station (☞p. 44). Press the MEMORY key. The preset number to which the selected station will be registered is displayed. Blinks / ENTER P01< 87.5 Preset number RETURN Proceed to step 4 to register the selected station with preset number displayed. OPTION 3 Press the PRESET / key to select the preset number to which the station will be registered.
Playback features Calling a preset station You can call preset stations. Press the FM key. Press the PRESET / key to select the desired preset number. You can clear registration of the preset stations. 1 2 PREPARATION 1 2 Clearing preset stations Press the FM key. Press the OPTION key. The option menu (☞p. 42) appears. y Tips • • Preset numbers to which no stations are registered are skipped. “No Presets” is displayed if no stations are registered.
Playback features Playing music stored on an iPod or computer over a wireless connection A wireless connection between this unit and the transmitter (YIT-W12TX) can be established to play music stored on an iPod or computer through this unit. For details of YIT-W12TX, refer to “Safety and Accessory Information” (separated booklet). / / / ENTER RETURN Playing music stored on an iPod or USB device over a USB connection (YSP-4300 only) Connect an iPod or other USB device (☞p.
Playback features 2 Connect the USB cable to the USB jack on the front of this unit. Operating an iPod via the TV screen 1 Press the USB key to switch the input source to USB. “Plugged” will be displayed. [iPod] Top Music Videos Plugged Press the USB key to switch the input source to USB. Select content stored on the iPod and start playback.1) 1/2 If “No device” is displayed on the TV screen2), check all iPod and USB connections.
Playback features Browse screen 1 [iPod] Playlists 2 Top25 Top100 80's songs 90's songs Best Alubums01 Best Alubums02 Party Soundtrack > > > > > > > > 3 3/10 1 List name 2 Content list / / / ENTER OPTION INFO Press the S/T key to select content. Press the X key to display a list of songs. Select a song and press the ENTER key to begin playback. 3 Content number/totals Press the S/T/W/X key to perform the following operations. Previous page Hold down the S key to display the previous page.
Playback features Displaying information on the current song Press the INFO key. Information displayed changes as follows each time the INFO key is pressed. Settings for the SHUFFLE and REPEAT features in the option menu can be specified. The option menu is displayed only in the front panel display. 1 2 Set the input source to USB and press the OPTION key. Press the S/T key to select “REPEAT” or “SHUFFLE”. PREPARATION Information on the current song can be displayed in the front panel display.
Playback features Using the iPod to control operation Playback can be controlled directly from the iPod. 1 Press the iPod CONTROL key. The TV screen will go blank, and operations can be controlled directly from the iPod. Press the iPod CONTROL key again to display the browse screen again. 2 Select content stored on the iPod and press or tap the iPod’s play button. See documentation provided with the iPod for instructions on operating the iPod.
Playback features Switching information displayed in the front panel display Press the INFO key. Display changes as follows each time the INFO key is pressed. iPods can be charged as follows.1) Connect the iPod to this unit via the USB cable supplied with the iPod. Connect the iPod to this unit while this unit is turned on.2) Charging continues when this unit enters standby mode. PREPARATION The input source and surround information is displayed.
Playback features Connecting a USB device Audio files (WAV, MP3, WMA, MPEG-4 AAC) stored on the device can be played by connecting the device to this unit. This unit supports sampling frequencies up to 48 kHz with playback of content stored on a USB device. This unit supports USB mass-storage class devices formatted using the FAT16 or FAT32 file system (except USB hard disks). See documentation supplied with the USB device for more information.
Playback features Operating a USB device via the TV screen 1 Press the USB key to switch the input source to USB. 1 [USB] Top 2 01 02 03 04 05 06 07 08 SONG SONG SONG SONG SONG SONG SONG SONG A screen like that shown below is displayed when the input source is switched to USB. [USB] Top SONG SONG SONG SONG SONG SONG SONG SONG 3 1/10 1 List name A B C D E F G H > > > > > > > > 1/10 If “No device” is displayed on the TV screen, check USB connections.
Playback features Displaying information on the current song Information on the current song can be displayed in the front panel display.1) Press the INFO key. Information displayed changes as follows each time the INFO key is pressed. FILE: File name T PLAY TIME: Playback time / / / OPTION ENTER T REM. TIME: Remaining playback time INFO T SONG: Song title T ARTIST: Artist name T ALBUM: Album title T Beam: Selected sound beam mode (☞p. 36) T Decoder: Current decoder (☞p.
Playback features Using the remote control Keys Descriptions Play the selected song. Pause playback. Stop playback. Hold down to rewind the current song. Use the REPEAT feature in the option menu to specify whether or not music stored on the USB device repeats with playback. The option menu is displayed only in the front panel display. 1 2 Set the input source to USB and press the OPTION key. Press the S/T key to select “REPEAT”.
SETTINGS Setup menu A variety of settings for this unit can be specified and adjusted from the setup menu. Among the options available are the sound beam output method for optimal surround sound effects, speaker volume control, and HDMI settings. • The setup menu is displayed on, and operated from, the TV screen (it cannot be displayed in the front panel display). See “Displaying the menu screen on the TV” (☞p. 21) for instructions on displaying the setup menu on the TV.
Setup menu Setup menu list Menu Sub menu Optimizes the beam settings automatically. ☞p. 26 SOUND OPTIMIZE ONLY Optimizes the sound settings automatically. ☞p. 26 HORIZONTAL ANGLE Front L, Front R, Center, Surround L, Surround R Adjust horizontal sound beam angle. ☞p. 60 BEAM TRAVEL LENGTH Front L, Front R, Center, Surround L, Surround R, Subwoofer Adjust sound beam length. ☞p. 60 FOCAL LENGTH Front L, Front R, Center, Surround L, Surround R Adjust sound beam focal length. ☞p.
Setup menu BEAM TRAVEL LENGTH 2) BEAM settings When “AUTO SETUP” in the “IntelliBeam” menu (☞p. 24) is used, recommended beam settings are automatically applied by this unit. “HORIZONTAL ANGLE”, “BEAM TRAVEL LENGTH”, “FOCAL LENGTH” (except “Center”), and “IMAGE LOCATION” settings, however, can later be fine-tuned. Surround sound channel output can also be modified from the “BEAM” menu. HORIZONTAL ANGLE Adjust the horizontal angle of sound beams for each channel using test tones.
Setup menu Center channel With negative focal lengths 2 Adjust the image location for the front right channel (RIGHT). The higher the percentage, the louder the output from the center channel. Control range: 0%* to 95% Right-channel sound is unnatural With the front right channel adjusted 1 CHANNEL OUT Sub menu: 5.1ch, 7.1ch, AUTO* Specify the sound beam output method (5.1ch, 7.1ch, AUTO).
Setup menu SOUND settings SPEAKER LEVEL BEAM AUX TV Adjust the volume of each channel to balance output levels. Use test sounds output from each channel to adjust volume for optimal balance.1) Sub menu: Front L, Front R, Center, Surround L, Surround R, Subwoofer Adjustable range: -20 to +20 Adaptive DRC 2) On Off Input level Volume: low Output level Output level Adjust this unit’s volume and dynamic range3) for optimal balance.
Setup menu DYNAMIC RANGE 3) HDMI setup Use to configure the settings related to HDMI signals and the HDMI control function. HDMI CONTROL Turn HDMI control (☞p. 30) on or off. Selectable item: OFF*, ON “OFF”: Disable the control function. The standby power consumption of this unit decreases. “ON”: Enable the control function. HDMI AUDIO OUT Dolby PLIIx PARAMETER Use to select a component to play back HDMI audio signals. This setting is effective when “HDMI CONTROL” is set to “OFF”.
Setup menu yAired settings Configure the wireless function utilizing Yamaha’s proprietary yAired technology. iPod INTERLOCK When this function is set to “ON”, this unit turns on when content stored on an iPod connected to the unit via YIT-W12TX begins playing. See “Playing back iPod music” in “Safety and Accessory Information” (separate booklet) for more information. Selectable item: OFF*, ON GROUP ID Assign the center unit a different group ID.
Setup menu DISPLAY settings Adjust the brightness of the front panel display. The smaller the value, the dimmer the display. When the Eco function is enabled, the specified brightness is applied for only a few seconds. Selectable item: -4 to -1, 0* (brightest) OSD LANGUAGE 1) Use to change the display unit of measurement. Selectable item: METERS, FEET* If units used for displaying measurements are changed from “METERS” to “FEET” or vice versa, the change will not be reflected in current settings.
Advanced setup The advanced setup enables more precise configuring of this unit’s function. For example, maximum volume can be specified and the INPUT key on the top panel can be disabled. No adjustment is necessary for normal operation. 1 2 Press the key to turn this unit to the standby mode. While holding down the INPUT key on the top panel, press the key on the remote control to turn on the power. / / / ENTER RETURN “ADVANCED” appears in the front panel display.
Advanced setup Menu Description Selectable item/Adjustable range Sets the volume level at power-on. OFF* (Not set), 1 to 70 Sets the maximum volume level. 1 to 99, MAX* (Maximum) INPUT LOCK Enables/disables the INPUT key on the front panel. ON (Disabled), OFF* (Enabled) Enables/disables the keys on the front panel. ON (Disabled), OFF* (Enabled) Enables/disables power-on by remote control input selector keys when the unit is in the standby mode.
TROUBLESHOOTING Troubleshooting Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the AC power supply cable, and contact the nearest authorized Yamaha dealer or service center. General Problem This unit does not operate properly.
Troubleshooting Cause Remedy Surround sound effects are insubstantial. When connecting this unit with playback component and TV digitally, the output setting of the playback component and TV is not valid. Refer to the manual supplied with your component and check the setting. The playback component is set for constant output from 2 channels (PCM, etc.). Change the playback component’s audio output setting.
Troubleshooting FM tuner (YSP-4300 only) Problem FM stereo reception is noisy. Cause Remedy The characteristics of FM stereo broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor. Check the antenna connections. There is distortion, and clear reception cannot be obtained even with a good FM antenna. There is multi-path interference. Adjust the antenna position to eliminate multi-path interference.
Messages iPod (when connected via USB jack)/USB device (YSP-4300 only) Features Remedy See page Unknown iPod The iPod being used is not supported by this unit. Connect supported iPod to this unit. Comm.Err The USB device cannot be accessed. The iPod cannot be accessed. Apply standby mode for this unit and reconnect the USB device. If the message continues to be displayed, move music files stored on the USB device to a different USB device.
APPENDIX Glossary Channel (ch) The sound image of the system A channel is an audio type that has been divided based on the range and other characteristics. Ex. 7.1 channel • For front speakers, Left (1ch), Right (1ch) • For center speaker (1ch) • For surround speakers, Left (1ch), Right (1ch) • For surround back speakers, Left (1ch), Right (1ch) • For the subwoofer (1ch × 0.1* = 0.1ch) * In contrast to a full 1-channel band, a component designed to enhance low frequency sound for added effect.
Glossary DTS DTS-HD High Resolution Audio DTS-HD High Resolution Audio is a high resolution audio technology developed for high-definition disc-based media including Blu-ray Disc. Selected as an audio standard for Blu-ray Disc, this technology delivers sound that is virtually indistinguishable from the original, offering a high-definition home theater experience. Supporting bitrates up to 6.0 Mbps for Blu-ray Disc, DTS-HD High Resolution Audio can carry up to 7.
Specifications YSP-CU4300 YSP-CU3300 Amplifier section Amplifier section • Rated Output Power Woofer (100 Hz, 1% THD, 4 Ω).................................................... 124 W Tweeter (1 kHz, 1% THD, 4 Ω).................................................... 37.4 W • Maximum Effective Output Power Woofer (100 Hz, 10% THD, 4 Ω).................................................. 150 W Tweeter (1 kHz, 10% THD, 4 Ω).....................................................
Specifications Supported USB device (YSP-CU4300) The “ ” logo and “IntelliBeam” are trademarks of Yamaha The “ ” logo and “Cinema DSP” are registered trademarks of Yamaha Corporation. “HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks, or registered trademarks of HDMI Licensing LLC. “x.v.Color” is a trademark of Sony Corporation. PLAYBACK The “ Corporation. ” and “yAired” are trademarks of Yamaha Corporation.
Specifications Available signal information HDMI signal compatibility Receivable audio signals Audio signal types Audio signal formats 2ch Linear PCM 2ch, 32–192 kHz, 16/20/24 bit Compatible media CD, DVD-Video, DVD-Audio, etc. Multi-ch Linear PCM 8ch, 32–192 kHz, 16/20/24 bit DVD-Audio, Blu-ray disc, HD DVD, etc. Bitstream (SD Audio) Dolby Digital, Dolby Digital Surround EX, DTS, DTS-ES DVD-Video, etc.
Index Numerics A 62 66 66 18 43 43 36 65 45 23 B Eco function ................................................................... 41 ENHANCER indicator..................................................... 8 Entertainment ................................................................. 35 Error buzzer.................................................................... 25 Error message................................................................. 25 F Firmware of this unit.............................
Index INTELLIBEAM MIC jack .............................................. 6 IntelliBeam microphone ................................................ 23 iPod CONTROL key ..................................................... 52 iPod INTERLOCK ........................................................ 64 iPod playback (USB connection) .................................. 48 iPod playback (wireless connection) ............................. 48 L Language for menu display ...........................................
Index W PREPARATION Weak signal ................................................................... 45 Wireless connection................................................. 20, 21 Wireless module .............................................................. 5 WMA ............................................................................. 33 X x.v.Color ........................................................................ 73 Y PLAYBACK yAired ........................................................
YE830B0/EN1
