Owner`s manual

ManualsBrandsYamaha ManualsMP3/MP4 playersNS-WSW160

Digital Sound Projector

Safety and Accessory Information

For more detailed information, refer to the Owner’s Manual on the CD-ROM. To view the Owner’s Manual, click “English” in the

screen displayed automatically when you insert the CD-ROM into your PC. Then follow the on-screen instructions. If the screen is

not displayed automatically, open the “index.html” in the CD-ROM.

Caution: Do not attempt to play this CD-ROM on an audio CD player.

The Owner’s Manual contained in the CD-ROM can be downloaded from the following URL:

http://download.yamaha.com/downloads/service/top/

p (Power key)

Turns on the power of this unit or sets it to the standby mode.

This unit may affect radio waves of iPhone when iPhone is charged by

using this unit. In addition, radio waves of this unit and iPhone may

interfere with each other. If you have a problem with your telephone

call, disconnect your iPhone from this unit.

Summary of content (8 pages)

PAGE 1
AB Digital Sound ProjectorTM Safety and Accessory Information For more detailed information, refer to the Owner’s Manual on the CD-ROM. To view the Owner’s Manual, click “English” in the screen displayed automatically when you insert the CD-ROM into your PC. Then follow the on-screen instructions. If the screen is not displayed automatically, open the “index.html” in the CD-ROM. Caution: Do not attempt to play this CD-ROM on an audio CD player.
PAGE 2
Caution: Read this before operating this unit. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this unit in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/ or cold. For proper ventilation, allow the following minimum clearances.
PAGE 3
Supplied accessories Check that you have received all of the following items.
PAGE 4
YIT-W12TX Owner’s Manual YIT-W12TX is a wireless transmitter designed for iPod series and computers. YIT-W12TX employs the Yamaha “AirWired” technology to establish a wireless connection with another Yamaha product that supports “AirWired” and enables playback of the iPod or computer on your Yamaha product. Also the supplied USB cable can be used for charging the iPod connected to the transmitter, or to play music or videos for an extended time.
PAGE 5
Setting the group ID Notes To establish a wireless connection (AirWired) between the transmitter and another Yamaha product, you need to set both the products to the same group ID. Change the group ID of the transmitter or your Yamaha product if their group IDs are not same. • Hold the iPod itself rather than the transmitter as illustrated below when operating the iPod. Do not cover the built-in wireless antenna that is located at the lower-left corner of the transmitter.
PAGE 6
3 Charging an iPod You can charge the iPod by connecting the transmitter to your computer using the supplied USB cable. Also, you can enjoy iPod music via the YSP-4300/YSP-3300 while charging the iPod. Start playback on your computer. After a wireless connection between the transmitter and YSP-4300/YSP-3300 is established, the YSP-4300/ YSP-3300 automatically selects the transmitter (YIT) as the input source and starts to play the computer audio.
PAGE 7
Problem A wireless connection cannot be made. (The green indicator flashes.) Cause Remedy The group IDs of the transmitter, center unit, and subwoofer are not same. Set to the same group ID (☞p. 5). For details on setting the group ID of the center unit and subwoofer, see “GROUP ID” and “Connecting the wireless subwoofer” in the Owner’s Manual. iPod recognition has failed because your iPod is not supported by the transmitter.
PAGE 8
Special Instructions for U.K. Model Yamaha Music Europe GmbH Siemensstr. 22-34 25462 Rellingen, Germany Tel: +49-4101-303-0 Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank Victoria 3006, Australia Tel: +61-3-9693-5111 For U.K. customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below.