AB Wireless Subwoofer Owner’s Manual
Caution: Read this before operating this unit. • • • • • • • • • • • • • • • • To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this unit in a cool, dry, clean place - away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose this unit to rain or water.
Contents Features of the Wireless Subwoofer NS-WSW160 ...... 1 Connecting the subwoofer wirelessly............................ 2 Installing the subwoofer ................................................ 1 Troubleshooting ............................................................ 3 Positioning the subwoofer on its side..................................2 Specifications................................................................
Positioning the subwoofer on its side The subwoofer can be laid on its side when positioned on a rack. Turn counterclockwise Leg Removing the legs and sheets Sheet Connecting the subwoofer wirelessly To connect the subwoofer to other AirWired-enabled Yamaha devices wirelessly, the same group ID must be assigned to all the devices. The default group ID of the subwoofer is A1. The LINK indicator lights when the subwoofer is on and the subwoofer and other devices are connected wirelessly.
Troubleshooting If this product doesn’t work as expected, look for a possible cause below. If the issue you are experiencing is not listed, or you cannot resolve it after reading through these instructions, disconnect the power cable and contact an authorized Yamaha dealer or service center. Problem No sound from the subwoofer. The subwoofer is too quiet. Cause Remedy The subwoofer is not connected wirelessly. Make sure the power cable is connected properly.
For U.K. customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet. Special Instructions for U.K.
Printed in Indonesia ZE90590-1
