Owner`s manual

Basic Operations and More
14 NU1 Owner’s Manual
Using the Metronome
The metronome feature is convenient for practicing with an accurate tempo.
1 Press [METRONOME] to start the metronome.
While the metronome sounds, a dot at the right side of the LED display and the
lamp of the metronome button flash on and off to the tempo.
2 Press [METRONOME] again to stop the metronome.
Adjusting the Tempo
During the operation described below, you can check the tempo value shown on the
display.
 To increase or decrease the value by 1:
While holding down [METRONOME], press [+] (or C#5 key) or [-] (or B4 key). Dur-
ing playback, simply press [+] or [-].
 To increase or decrease the value by 10:
While holding down [METRONOME], press the D5 or A#4 key.
 To reset the value to the default (120):
While holding down [METRONOME], press the C5 key or press [+] and [-] simulta-
neously. During playback, press both [+] and [-] simultaneously.
Selecting the Beat
While holding down [METRONOME], press one of the C3–F3
keys. The selected value is shown on the display while both
controls are held.
Only the first beat is accented with a bell sound when set to a value other than 0.
Adjusting the Metronome volume
While holding down [METRONOME], press one of the C1–G2 keys to set the vol-
ume. The specified value is shown on the display while both controls are held.
120.
The beat lamp flashes
at the current tempo
Setting range: 5 to 500 beats per minute
Default setting: 120
NOTE
The metronome tempo is restored to the
default setting when the power is turned off.
C5 D5B4
A#4C#5
Default setting: 0 (No downbeat)
NOTE
The Beat of the metronome is restored to
the default setting when the power is turned
off.
Display Key Beat Display Key Beat
0
C3 0 (no downbeat)
4
D#34
2
C#3 2
5
E3 5
3
D3 3
6
F3 6
0
Beat
C3 F3
Setting range: 1–20
Default setting: 15
NOTE
The metronome volume setting is retained
even when the power is turned off.
C1 (1) G2 (20)D2 (15)
The volume level increases as you press higher keys
max.min.