Owner`s manual

Using USB Flash Memory
24 NU1 Owner’s Manual
Formatting USB flash memory
NOTICE
Executing the Format operation will delete all data in the USB flash memory. Before formatting, save important data to a com-
puter or another storage device.
1 Connect the USB flash memory to the [USB TO DEVICE] terminal.
2 While holding [FUNCTION] and [PLAY/STOP], press [RECORD].
“
For
” appears on the display for a while, then “
n Y
” appears. If you wish to
cancel this operation, press [-] at this timing.
3 Press [+] to execute the Format operation.
Dashes appear in succession on the display, indicating that Formatting is in pro-
cess. When the operation is completed, “
End
” appears on the display.
NOTICE
While dashes appear in succession on the display, never turn off the power or discon-
nect the USB flash memory.
Copying User Songs in the instrument to a USB flash memory
You can copy the User Song in the instrument to the USB flash memory. The copied Song is saved as SMF format 0 to
the “USER FILES” folder in the USB flash memory, and the file is automatically named as “USERSONG**.MID”
(**: numerals).
1 Connect the USB flash memory to the [USB TO DEVICE] terminal.
2 For the Copy source, select a User Song in this instrument.
For detailed instructions, refer to page 18.
3 While holding [FUNCTION], press [PLAY/STOP].
On the display, “
SAu
” appears for a while then the Song number (for example
“
S.00
”) appears as Copy destination.
To cancel the Copy operation before it begins, press any button other than
[PLAY/STOP] here.
4 Press [PLAY/STOP] to execute the Copy operation.
Dashes appears in succession on the display, indicating that the Copy operation is
in process. When the Copy is completed, “
End
” appears on the display.
NOTICE
When dashes appear in the display in succession, never turn off the power or discon-
nect the USB flash memory.
NOTE
When you execute a Song Recording (page
22), Copy (below) or Delete (page 25)
operation, a “
UnF
” prompt may appear in
the display, indicating that the USB flash
memory has not been formatted yet. In this
case, execute the Format operation by pro-
ceeding from Step 2 as described at left.
NOTE
If any Song other than one of the User
Songs is selected in Step 2, “
E01
”
appears in Step 3. In this case, return back
to Step 2.
NOTE
When there is insufficient free memory
capacity in the USB flash memory, the cop-
ied Song cannot be saved. To ensure suffi-
cient memory, try erasing unnecessary files
(page 25).
SAu S.00
Song number
(Example: “S.00”)