NUAGE FADER CONTROL SURFACE Ncs500-FD Getting Started EN
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Contents PRECAUTIONS .....................................................................................5 NOTICE .............................................................................................................. 6 Information.......................................................................................................... 6 Introduction ..........................................................................................7 A Message from the Development Team.......................
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards.
NOTICE Information To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below. About copyrights Handling and Maintenance • Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the device, TV, or radio may generate noise.
Introduction Introduction A Message from the Development Team Thanks to experience with the DM and O series, intensive research, and invaluable feedback from our users, it is our great pleasure to be able to deliver a new level of production support in the Nuage series. Our technology is there to give you unrestricted creative freedom, and we sincerely hope that the Nuage series plays a role in your growth and continued success. Thank you for choosing a Nuage series Nuage Fader unit.
Introduction When you install TOOLS for NUAGE, NUAGE Workgroup Manager, NUAGE Extension, and NUAGE PT Bridge (Mac only) will be installed. NUAGE Workgroup Manager is an application that allows control over the devices and DAW software applications as a Workgroup on Nuage system. NUAGE Extension is a program that allows you to link the device with Nuendo (for versions which support the link function).
Setup Setup Overall Process 1. Set up the device, LCD, computer, etc., then connect them. “Setting and Connecting” (page 10) 2. Connect the power cable then turn the power on. “Setting up the Power Supply” (page 11) 3. Install TOOLS for NUAGE. “Installing TOOLS for NUAGE” (page 11) 4. Configure the Workgroup on NUAGE Workgroup Manager.
Setup Setting and Connecting Set up and connect as required according to the following examples.
Setup Computer Keyboard Installation Setting up the Power Supply NOTE 1. Insert one plug of the power cable into the Keyboards of up to 460 (width) x 138 (depth) mm and with front and rear heights of up to 29 and 38 mm, respectively, can be accommodated. 1. Open the drawer. [AC IN] terminal on the device. 2. Insert the other plug of the power cable into a proper AC wall outlet. 3. Turn on (|) the [Power switch] on the device. NOTE Turn it off ( ) when turning off the device.
Troubleshooting (in setting up) Troubleshooting (in setting up) Power does not turn on • Is [Power switch] turned on? • Is the power cable connected to a proper AC outlet? • Is the power cable plug inserted all the way? If the power still does not turn on, contact your Yamaha dealer.
Appendix Appendix Adjusting the Touch Sensitivity Contents of the Operation Manual NOTE Introduction How to Read the Manual To adjust the touch sensitivity, the completion of “Setup” (page 9) then launch Nuendo are necessary. To adjust the touch sensitivity, use the Nuage Fader setting window (NUAGE FADER Setup) opened from the “Device” menu on Nuendo. Description of the Device Top Panel Rear Panel Description of the Software Programs NUAGE FADER Setup 1. Launch Nuendo. 2.
Appendix Specifying the Brightness The way of specifying the brightness is the same as “Adjusting the Touch Sensitivity” (page 13). When the window is displayed, specify “Brightness.” Option Description LED Low Specifies the brightness of the button when dim. LED High Specifies the brightness of the button when lit. OLED Specifies the brightness of organic EL display in both CHANNEL STRIP section on Nuage Fader and CONTROL ROOM section on Nuage Master.
Appendix Dimensions 156 141 138 84 18° 0° 720 515 33 10 147.5 99 15 215 72.5 15 87.
87 Appendix Unit: mm 16 NUAGE FADER Getting Started
Appendix Specifications ELECTRICAL CHARACTERISTICS All level controls are the nominal position.
Appendix European Models Inrush Current based on EN 55103-1: 2009 3.0 A (on initial switch-on) 3.
Memo
Information for Users on Collection and Disposal of Old Equipment This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC.
Información para Usuarios sobre Recolección y Disposición de Equipamiento Viejo Este símbolo en los productos, embalaje, y/o documentación que se acompañe significa que los productos electrónicos y eléctricos usados no deben ser mezclados con desechos hogareños corrientes. Para el tratamiento, recuperación y reciclado apropiado de los productos viejos, por favor llévelos a puntos de recolección aplicables, de acuerdo a su legislación nacional y las directivas 2002/96/EC.
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A.
Yamaha Pro Audio Global Web Site http://www.yamahaproaudio.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ C.S.G.
