Update Manual
NUAGE Firmware Update Guide 4
■ Update procedure sequence
Update each firmware component in the following sequence.
If you plan to update multiple NUAGE series units, repeat the procedure described in “Update” for
each unit in sequence.
Updating the NUAGE series firmware
TCP/IP settings of computer
Install the Dante Firmware Update Manager
Updating the Dante firmware
The firmware update is completed
● Refer to the section “Nuage Compatibility” at the Yamaha Pro Audio site (below) for details
Dante firmware update requirements.
http://www.yamahaproaudio.com/downloads/
When updating Nuage
I/O
and Dante firmware
needs to be updated:
When updating Nuage
Fader or Nuage Master,
or
when
updating Nuage
I/O
and updating Dante
firmware
is unnecessary: