NUAGE MASTER CONTROL SURFACE Ncs500-CT Getting Started EN
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Contents PRECAUTIONS .....................................................................................5 NOTICE .............................................................................................................. 6 Information.......................................................................................................... 6 Introduction ..........................................................................................7 A Message from the Development Team.......................
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards.
NOTICE Information To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below. About copyrights Handling and Maintenance • Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the device, TV, or radio may generate noise.
Introduction Introduction A Message from the Development Team Thanks to experience with the DM and O series, intensive research, and invaluable feedback from our users, it is our great pleasure to be able to deliver a new level of production support in the Nuage series. Our technology is there to give you unrestricted creative freedom, and we sincerely hope that the Nuage series plays a role in your growth and continued success. Thank you for choosing a Nuage series Nuage Master unit.
Introduction software applications as a Workgroup on Nuage system. NUAGE Extension is a program that allows you to link the device with Nuendo (for versions which support the link function). NUAGE PT Bridge is an application that makes it possible to control* Pro Tools (Mac only) using Nuage Fader and Nuage Master devices. (*: basic functions only.) TOOLS for NUAGE is available on the following website. http://www.yamahaproaudio.
Setup Setup Overall Process 1. Set up the device, LCD, computer, etc., then connect them. “Setting and Connecting” (page 10) 2. Connect the power cable then turn the power on. “Setting up the Power Supply” (page 11) 3. Install TOOLS for NUAGE. “Installing TOOLS for NUAGE” (page 11) 4. Configure the Workgroup on NUAGE Workgroup Manager.
Setup Setting and Connecting Set up and connect as required according to the following examples.
Setup Setting up the Power Supply 1. Insert one plug of the power cable into the [AC IN] terminal on the device. 2. Insert the other plug of the power cable into a proper AC wall outlet. 3. Turn on (|) the [Power switch] on the device. NOTE Turn it off (P) when turning off the device. WARNING Only use the included AC power cable (or an equivalent recommended by Yamaha). Using the wrong cable can result in damage to the device or overheating.
Troubleshooting (in setting up) Troubleshooting (in setting up) Power does not turn on • Is [Power switch] turned on? • Is the power cable connected to a proper AC outlet? • Is the power cable plug inserted all the way? If the power still does not turn on, contact your Yamaha dealer.
Appendix Appendix Adjusting the Touch Sensitivity Contents of the Operation Manual NOTE Introduction How to Read the Manual To adjust the touch sensitivity, the completion of “Setup” (page 9) then launch Nuendo are necessary. To adjust the touch sensitivity, use the SETUP page displayed on the touch screen ([Multi function display]) on Nuage Master. Description of the Device Top Panel 1. Press [SETUP] on the right side of [Multi Front Panel function display].
Appendix Specifying the Brightness The way of specifying the brightness is the same as “Adjusting the Touch Sensitivity” (page 13). When the window is displayed, specify “Brightness.” Option Description LED Low Specifies the brightness of the button when dim. LED High Specifies the brightness of the button when lit. OLED Specifies the brightness of organic EL display in both CHANNEL STRIP section on Nuage Fader and CONTROL ROOM section on Nuage Master.
Appendix 15 Dimensions 217 146 84 138 30° 18° 0° 8.5 72.5 720 147.5 450 98 10 104 99 161 15 87.5 4 29 73 139.
87 Appendix Unit: mm 16 NUAGE MASTER Getting Started
Appendix Specifications ELECTRICAL CHARACTERISTICS All level controls are the nominal position. Output impedance of signal generator:150ohms. 0dBu = 0.775Vrms input output RL CONDITIONS MIN TYP MAX UNITS -3 0.0 0.5 dB Frequency Response TO PHONES Phones A or B 8Ω Phones level control max, Input level +4dBu(typ), 20Hz-20kHz, ref to the nominal output level @1kHz Total Harmonic Distortion*1 TO PHONES Phones A or B 8Ω +4dB@20Hz-20kHz, Phones level control max 0.
Appendix *1 Total Harmonic Distortion is measured with 80kHz LPF. *2 Hum & Noise are measured with A-weighting filter and 30kHz LPF. *3 Crosstalk is measured with a -30dB/octave filter @22kHz. *4 XLR-3-31 and XLR-3-32 type connectors are balanced.(1=GND, 2=HOT, 3=COLD) *5 PHONES stereo phone jack is unbalanced. (Tip=LEFT, Ring=RIGHT, Sleeve=GND) General Specifications Dimensions (W x D x H) 354 x 720 x 161mm Net Weight 10.
Memo
Information for Users on Collection and Disposal of Old Equipment This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC.
Información para Usuarios sobre Recolección y Disposición de Equipamiento Viejo Este símbolo en los productos, embalaje, y/o documentación que se acompañe significa que los productos electrónicos y eléctricos usados no deben ser mezclados con desechos hogareños corrientes. Para el tratamiento, recuperación y reciclado apropiado de los productos viejos, por favor llévelos a puntos de recolección aplicables, de acuerdo a su legislación nacional y las directivas 2002/96/EC.
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A.
Yamaha Pro Audio Global Web Site http://www.yamahaproaudio.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ C.S.G.