Getting Started Guide

Appendix
NUAGE MASTER Getting Started 13
Appendix
Contents of the Operation
Manual
Introduction
How to Read the Manual
Description of the Device
Top Panel
Front Panel
Rear Panel
Description of the Software Programs
Pages Shown on the Multi Function Display
NUAGE MASTER Setup
NUAGE Workgroup Manager
Troubleshooting (in operation)
Appendix
Contents of the Getting Started Manual
Replacing Square-button Labels
Control Pro Tools
Firmware Updates
This product is designed to allow the internal firmware to
be updated in order to improve performance, add
functionality, or fix problems. Firmware updates are
performed with the product connected to a computer, so
you must first install the “NUAGE Workgroup Manager” in
your computer. You can install the NUAGE Workgroup
Manager by installing “TOOLS for NUAGE” provided on
the following website.
http://www.yamahaproaudio.com/
For details on the update procedure and settings, refer to
the firmware update guide provided on the website.
Adjusting the Touch
Sensitivity
NOTE
To adjust the touch sensitivity, the completion of “Setup” (page 9)
then launch Nuendo are necessary.
To adjust the touch sensitivity, use the SETUP page
displayed on the touch screen ([Multi function display]) on
Nuage Master.
1. Press [SETUP] on the right side of [Multi
function display].
The SETUP page is displayed.
2. Touch “Touch Sensitivity.”
The “Touch Sensitivity” layer is selected, and the
layer will be controllable by the knobs ([Multi
function knob]) in the lower part of the [Multi function
display].
3. Turn the [Multi function knob] to adjust the
touch sensitivity.
The adjustments are now completed.
Option Description
Knob
Adjusts the sensitivity of the [Multi
function knobs] on Nuage Fader and
Nuage Master.
Slider
Adjusts the sensitivity of the slider
([Touch slider bar]) in the CHANNEL
STRIP section on Nuage Fader.
Fader
Adjusts the sensitivity of the [Faders] in
the CHANNEL STRIP section on Nuage
Fader.
LCD
Adjusts the sensitivity of the [Multi
function display] on Nuage Master.