Getting Started Guide

Appendix
18 NUAGE MASTER Getting Started
*1 Total Harmonic Distortion is measured with 80kHz LPF.
*2 Hum & Noise are measured with A-weighting filter and 30kHz LPF.
*3 Crosstalk is measured with a -30dB/octave filter @22kHz.
*4 XLR-3-31 and XLR-3-32 type connectors are balanced.(1=GND, 2=HOT, 3=COLD)
*5 PHONES stereo phone jack is unbalanced. (Tip=LEFT, Ring=RIGHT, Sleeve=GND)
General Specifications
CONNECTOR PIN ASSIGNMENTS
Specifications and descriptions in this manual are for information purposes only. Yamaha Corp. reserves the right to change
or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be
the same in every locale, please check with your Yamaha dealer.
European Models
Inrush Current based on EN 55103-1: 2009
3.0 A (on initial switch-on)
3.0 A (after a supply interruption of 5s)
Conforms to Environments: E1, E2, E3 and E4
Dimensions (W x D x H)
354 x 720 x 161mm
Net Weight
10.0kg
Included Accessories
Jog wheel, Power cable, Brackets (2), Getting Started
Pin No. Signal
1NC
2RXD
3TXD
4NC
5DGND
6NC
7NC
8NC
9NC
HOUSING Frame GND
5 4 3 2 1
9 8 7 6