Supplementary Manual

NUAGE V1.1 Supplementary Manual 9

Added some editing

operations (Nuage Master)

The waveform offset can be changed, and the cut/copied

event(s) can be pasted maintaining the position relative to

the Project Cursor.

EDIT Section

1 [MOVE]

When the Object Selection Tool is selected, if you turn the

[JOG WHEEL] while holding down [SHIFT] and [ALT], the

waveform offset of the selected track can be changed.

2 [PASTE]

When the Object Selection Tool is selected, if you press

[PASTE] while holding down [SHIFT], the cut/copied

event(s) can be pasted maintaining the position relative to

the Project Cursor.

Added other various functions

(Nuage Master)

SETUP Page

1 Disp Mode

Selects the display format of a [Channel name display].

2 Numeric Pad Input

Selects the input format when you set the Project Cursor

position in the Locate function. If you set this to “Right,”

you can input the Project Cursor position as a text.

DYN Page

1 Title Bar

Turns the “Bypass” switch that you touch on (lit) and off.

2 Parameters

Displays each processor's parameters. The parameters

that you touched can be controlled with the [Multi function

knob].

If you press the rightmost [Multi function knob] when

“Comp” is selected, the related parameters are displayed

in graph form. To return to the previous view, press the

[Multi function knob] again.

TRANSPORT Page

MAIN Page

1 Lock/Unlock

Lock (lit) or unlock “CLICK” and “TEMPO.”

If you lock these parameters, they cannot be controlled.

1 2