Operation Manual

Using the Application
NUAGE Workgroup Manager Operation Manual 6
Configuring the system
1. Open NUAGE Workgroup Manager.
2. Add the two DAW applications, the Nuage
Fader, and the Nuage Master to the
Workgroup.
3. Click Setup to open the Setup window
(page9).
4. Set the data to be transmitted from the RS-
232C ports on the Nuage Fader and the
Nuage Master to the KVM switches when the
buttons from the DAW Select section are
pressed, and also set the corresponding
transmission parameters.
In the DAW A field, for example, you should enter
the ASCII message to be sent to the KVM switches
to switch them to DAW A when the DAW A button is
pressed. For information on these messages and
RS232C parameter settings, refer to the manuals
that came with the KVM switches.