Specifications

Description of the Device
NUAGE MASTER Operation Manual 18
When the Addition function pop-up window is shown, the
[Input keys] have the following functions.
2 [MARKER]
Sets the [Input keys] to Marker mode. In the Marker mode,
you can set the Project Cursor to the desired Marker
position with the [Input keys].
The Marker mode has the following two functions.
• Marker Jump function (page 18)
• Cycle Marker Jump function (page 19)
Marker Jump Function
In the Marker Jump function, you can set the Project
Cursor to the Marker position by inputting the Marker ID.
When you press any one of the buttons [0] – [9], [BACK
SPACE], [CLEAR], [PREV -], [NEXT +], [CYCLE .], and
[ENTER] in the Marker mode, the pop-up window for the
Marker Jump function is shown on the [Multi function
display]. However, when the MARKER Page (page 42) in
the TRANSPORT page is called up in the [Multi function
display], the pop-up window is shown on the Label Pane
area.
When a page other than MARKER is called up in
the [Multi function display]
When the MARKER page is called up in the [Multi
function display]
1 Current Position
Displays the current Project Cursor position.
2 Locate To Marker
Inputs the Marker ID.
3 Marker Position
Displays the Marker position of the Marker ID input to
Locate To Marker.
4 Marker Name
Displays the Marker name of the Marker ID input to Locate
To Marker.
When the Marker Jump pop-up window is shown, the
[Input keys] have the following functions.
[Input keys] Function
[0] – [9] For inputting numbers to the input position.
[]/[] Moves the input digit right and left.
[BACK SPACE] Deletes the number at the input position.
[CLEAR] Deletes all input numbers.
[SET] Selects the Set mode (the button lights).
[PREV -] Selects the Subtraction function (the button
lights).
[NEXT +] Sets the Project Cursor position by inputting
the addition value. To adjust the value
continuously, hold down the button.
[CYCLE .] Moves the input digit to the right.
[ESC] Cancels the input then closes the pop-up
window.
[ENTER] Determines the input then closes the pop-up
window.
1
3
2
4
[Input keys] Function
[0] – [9] Inputs the Marker ID to the input position.
[]/[] When the Marker window is open, moves the
marker selection.
[BACK SPACE] Deletes the Marker ID from the input
position.
[CLEAR] Deletes all input Marker IDs.
[SET] Selects the Set mode (the button lights).
[PREV -] Adds -1 to the input Marker ID.
[NEXT +] Adds +1 to the input Marker ID.
[CYCLE .] Selects the Cycle Marker Jump function (the
button lights).
[ESC] Cancels the input then closes the pop-up
window.
[ENTER] Determines the input then closes the pop-up
window.
24