Specifications

Description of the Device
NUAGE MASTER Operation Manual 22
AUTOMATION Section
Overview
This section is for operating Automation.
The function assignments of the buttons can be changed
to other Automation functions as desired. For details on
changing the function assignments, see “Automation
window” (page 45) in NUAGE MASTER Setup.
Controls and Functions
1 [Display access]
Calls up the “AUTOMATION Page” (page 37) in the [Multi
function display].
2 [FILL PUNCH]
Turns Fill To Punch on (lit) and off (dim).
3 [FILL TO START]
Turns Fill To Start on (lit) and off (dim).
4 [FILL TO END]
Turns Fill To End on (lit) and off (dim).
5 [FILL LOOP]
Turns Fill Loop on (lit) and off (dim).
6 [TOUCH]
Selects the Touch mode.
7 [LATCH]
Selects the Auto-Latch mode.
8 [X-OVER]
Selects the Cross-Over mode.
9 [TRIM]
Turns Trim on (lit) and off (dim).
MULTI FUNCTION DISPLAY Section
Overview
This section is for displaying and editing the section and
channel parameters.
The [Multi function display] is a touch screen for
displaying the page for editing the section and channel
parameters. You can select and edit certain parameters
on the page by touching it.
NOTICE
Never use a sharp or pointed object such as your fingernail to
operate the touch screen. Doing so may scratch the screen
and render the touch screen inoperable
To open the page displayed on the [Multi function
display], press [Display access] at the upper left of the
section or the right side of the [Multi function display].
[Display access] at upper left of section
1
2
6789
345