Specifications

Description of the Software Programs
NUAGE MASTER Operation Manual 29
To input parameter values (which allow number input) in
the page, use the Parameter mode in the NUMERIC PAD
section (page 16). To do this:
1. Press [PARAM] (page 19) in the NUMERIC
PAD section to select the Parameter mode.
2. Touch the parameter (which allows number
input) shown on the [Multi function display]
to select it.
3. Input the number with the [Input keys]
(page 21) in the NUMERIC PAD section.
SETUP Page
Overview
This page is for configuring general settings, such as
touch sensitivity or LED brightness. To open it, press
[SETUP] (page 24) in the MULTI FUNCTION DISPLAY
section.
Touching a column in this page enables that column’s
parameter for control with the [Multi function knob].
Controls and Functions
1 Knob
Adjusts the touch sensitivity of the [Multi function knob].
The larger the number, the higher the sensitivity.
2 Slider
Adjusts the touch sensitivity of the [Touch slider bar]. The
larger the number, the higher the sensitivity.
3 Fader
Adjusts the touch sensitivity of the [Fader] on Nuage
Fader. The larger the number, the higher the sensitivity.
4 LCD
Adjusts the touch sensitivity of the [Multi function display].
The larger the number, the higher the sensitivity.
5 LED Low
Adjusts the brightness of the LEDs on the buttons or
knobs (when dimmed). The larger the value, the brighter
the LED.
6 LED High
Adjusts the brightness of the LEDs on the buttons or
knobs (when fully lit). The larger the value, the brighter the
LED.
7 OLED
Adjusts the brightness of the [CONTROL ROOM display]
and the [Channel name display] on Nuage Fader. The
larger the value, the brighter the LED.
8 LCD
Adjusts the brightness of the [Multi function display]. The
larger the number, the brighter the display.
9 Follow Slider Scroll
Turns on and off the function which causes the [Fader]
position on Nuage Fader to follow scrolling through the
channels when you use the [Touch slider bar] on Nuage
fader. When this function is off, the [Fader] position
changes only after you stop scrolling.
) Motor
Turns the motor power of [Fader] on Nuage Fader on and
off.
! Ch Select
Turns on and off the function which allows you to select
channels by touching [Fader] on Nuage Fader.
@ OLED Off Time
Configures the period of time that elapses before the
[CONTROL ROOM display] and the [Channel name
display] on Nuage Fader are automatically darkened.
# Smart Switch Delay
When you press then release the following buttons, the
lamps of the buttons turn on when they are pressed. This
control adjusts the time that elapses before the buttons
light.
• [SHUTTLE] (JOG WHEEL section)
• [SCROLL] (JOG WHEEL section)
• [SELECT] (JOG WHEEL section)
• [ZOOM] (JOG WHEEL section)
• [MOVE] (JOG WHEEL section)
1
9
) ! @ # $
2 3 4 5 6 7 8