Specifications

Description of the Software Programs
NUAGE MASTER Operation Manual 42
4 TEMPO
Selects the Tempo mode.
5 SYNC
Turns Synchronization on (lit) and off.
6 Time Display
Sets the Project Cursor position.
7 Transport
Operates the basic Transport functions.
MARKER Page
This page is for operating the Marker Track functions.
1 Marker Overview
Displays the Marker Track overview. The “” arrow
indicates the selected Marker. The white line indicates the
Project Cursor.
2 Marker
Displays the Marker information. The information includes
the ID, name, position, and bar graph. You can select
Marker or move the Project Cursor to the Marker position
by touching it. To switch this function, touch the buttons in
the Label Pane area or press the [Multi function knob].
3 Nuendo
Opens the Marker Track in the Nuendo window.
4 Track
Selects the active Marker Track.
5 Type
Selects the type of Marker shown.
6 Sort
Sorts the Markers.
7 Function
Operates the Marker functions from the Marker window.
8 u/d
Scrolls through the Main area view.
OVER VIEW Page
This page is for operating the Overview functions.
1 Overview
Displays the overview of the project. The blue area
indicates the range which is shown in the Project Window.
2 Move
Lets you move the displayed area by dragging it.
3 Move & Zoom
Lets you move the displayed area by dragging it right and
left. You can Zoom In or Zoom Out the displayed area by
dragging it up and down.
4 Left
Lets you move the start position of the displayed area by
dragging it.
5 Right
Lets you move the end position of the displayed area by
dragging it.
[
PARAM
]
1
2
3 4 5 6 7 8
1
2 3 4 5