User Manual

Description of the Software Programs
NUAGE MASTER Operation Manual 28
Description of the
Software Programs
Pages Shown on the Multi
Function Display
NOTE
The icon ( ) at the side of the button name or area name
indicates that you can control the corresponding button or area
by touching it. Also, the icon ( ) at the side of the
parameter name indicates that you can input number values to
the corresponding parameter by touching it (if you’ve turned on
[PARAM] (page 19) in the NUMERIC PAD section.
Overview
The following pages are shown on the [Multi function
display].
• SETUP page (page 29)
• TRACK LIST page (page 30)
• CHANNEL CONTROL page (page 32)
- MAIN page (page 33)
- EQ page (page 34)
- DYN page (page 34)
- SENDS page (page 34)
- CUES page (page 35)
- PAN page (page 35)
- INSERT page (page 36)
- PLUG-IN page (page 36)
• AUTOMATION page (page 37)
• USER ASSIGNABLE page (page 38)
• CONTROL ROOM page (page 38)
- MAIN page (page 38)
- SPEAKER CONTROL page (page 39)
• CUES page (page 40)
• MONITOR SOURCE page (page 40)
• COMMUNICATION page (page 41)
• TRANSPORT page (page 41)
- MAIN page (page 41)
- MARKER page (page 42)
- OVER VIEW page (page 42)
• EDIT page (page 43)
To select the pages, press [Display access] in each
section, or press the buttons at the right side of the MULTI
FUNCTION DISPLAY section (page 22), or touch the tabs
or buttons at the top of the pages.
Each page has the following four areas.
The page title and the tabs for selecting other pages are
shown on the Title area. Buttons unique to the selected
page or buttons for selecting the page views are shown
on the Tool area. The parameters or the configuration
windows are shown on the Main area. The parameter
currently assigned for control with the [Multi function
knob] is indicated on the Label Pane area.
When you touch the top border of the Label Pane area in
certain pages, the window for selecting parameters (in
banks or groups of eight) for control with the [Multi
function knob] appears.
A single horizontal row indicates a bank. When you touch
a bank, the controllable parameters of the [Multi function
knobs] change to the corresponding bank, and then the
window closes.
[
PARAM
]
Title area
Tool area
Main area
Label Pane
area