User Manual

Description of the Software Programs
NUAGE MASTER Operation Manual 33
When you touch “Channel information,” the channel
selection window is shown.
To scroll through the window, touch “u” or “d.” When you
touch the channel, the channel is selected and the
window closes.
When you touch “” in the Title area, the window
indicating the output level of the selected channel is
shown.
In this condition, you can adjust the output level by the
rightmost [Multi function knob]. To close the window,
touch “.”
By touching “Nuendo” in the Tool area, you can open the
channels configuration window on the screen. However, in
the PLUG-IN page, the plug-in effect window is opened.
Touch again to close.
Controls and Functions
MAIN Page
This page is for operating Routing, Phase, Low Cut, etc.
for the selected channel.
1 Input Routing
Calls up the Input Routing pull-down menu, letting you
select the port.
2 HC
Adjusts the frequency of High Cut.
3 LC
Adjusts the frequency of Low Cut.
4 Gain
Adjusts Input Gain.
5 Phase
Turns phase inversion on (lit) and off.
6 Summing Mode
Turns Summing Mode on (lit) and off. When this is on, you
can output the audio signal of multiple ports at the same
time.
7 On/Off
Turns Direct Routing on (lit) and off.
8 Direct Routing
Selects the port for Direct Routing.
9 M
Turns Mute on (lit) and off.
7 8 @ #
1
2
3
!
4
5
9
6 )
[
PARAM
]
[
PARAM
]
[
PARAM
]