User Manual

Description of the Device
NUAGE MASTER Operation Manual 8
CUES Section
Overview
This section is for turning Mute of CUE 1 – CUE 4 in the
Control Room on and off. To operate it, make sure that
Control Room is turned on in Nuendo and the channels
you need have been created, then configure the input/
output routing for those channels.
If you have configured multiple DAW software programs
and operate them by selecting the “DAW SELECT
Section” (page 24), this section will always operate the
Control Room of DAW A. In other words, the Control Room
section is not affected by the DAW software selection.
Controls and Functions
1 [Display access]
Calls up the “CUES Page” (page 40) in the [Multi function
display].
2 [SIG Indicators]
Roughly indicates the CUE 1 – CUE 4 levels.
3 [MUTE 1] – [MUTE 4]
Turns Mute of CUE 1 – CUE 4 on and off.
1
3
2
Lamp Description
Lit (red) Overload
Lit (orange) -18 dB or more, but less than 0 dB
Lit (green) -40 dB or more, but less than -18 dB
Off Less than -40 dB
Lamp Description
Lit Mute of CUE is turned on.
Dim Mute of CUE is turned off.
Off CUE has not been configured yet.