User Manual

Added functions in NUAGE V1.7 80
6. Turn the 16th [Multi function knob] from the
left of the Nuage Fader CHANNEL STRIP
section (the far right knob), then select from
group A – D or E for which insert is used.
“Insert 1 – 4” (A – D) or “Insert 5” (E) will be displayed
on the Plug-in Panel window.
7. Turn the [Multi function knob] to select the
insert. The [Multi function knob] to be operated
varies depending on the target slot for “Insert.”
8. Press the ninth [Multi function button A] from
the left or the one that corresponds to the
channel with insert.
The selected insert is assigned.
Operation (Parameter change)
Numbers in the illustration below correspond to the instruction
steps.
1. On a Mac with Avid Pro Tools, click or
on the menu bar.
NOTE
If the icons are not displayed, install NUAGE PT Bridge in
TOOLS for NUAGE.
2. Click “Plug-in Panel.”
3. Select the “Insert” for which you want to
change the parameters on Avid Pro Tools.
NOTE
You can also select the corresponding channel using the [e]
button for 1 to 8 in the CHANNEL STRIP section of the Nuage
Fader.
4. Turn the 16th [Multi function knob] from the
left of the Nuage Fader CHANNEL STRIP
section (the far right knob), then select from
group A – D or E depending on which insert is
used.
“Insert 1 – 4” (A – D) or “Insert 5” (E) will be displayed
on the Plug-in Panel window.
Insert A or E
Insert B
Insert C
Insert D